Titan part 2440406 is a filter designed for use on Impact X 540 I, X 440, and X 410 airless sprayers. This filter removes contaminants from the coating material, protecting the spray tip and fluid section from debris and ensuring a smooth, even spray pattern. Replacing a clogged or damaged filter restores proper flow, improves atomization, and prevents tip clogs.
| Part Number | 2440406 |
|---|---|
| Part Description | Filter |
| Brand | Titan |
| Fits | Impact X 540 I, X 440, X 410 |
| Condition | New |
The Titan 2440406 Filter is a genuine OEM replacement filter designed for Impact X 540 I, X 440, and X 410 airless sprayers. Located in the fluid path, it captures fine particles, dried paint, and other contaminants before they reach the spray tip. This filtration is essential for maintaining a consistent spray pattern, preventing tip clogs, and ensuring a professional finish.
Over time, filters can become clogged with debris, restricting material flow and causing poor atomization, spitting, or uneven spray patterns. A clogged filter also forces the pump to work harder, potentially leading to premature wear. Replacing with the correct 2440406 filter restores proper flow, protects the tip, and ensures consistent, high‑quality spraying.
| Contaminant removal | Captures fine particles before the tip |
|---|---|
| Tip protection | Prevents clogs and extends tip life |
| Finish quality | Ensures smooth, even spray pattern |
| Clogged | Reduced flow or poor spray pattern | Damaged screen | Tears or holes that let debris pass | Frequent tip clogs | Indicates filter failure | Visible debris | Material buildup that cannot be cleaned |
|---|
Titan part 2440406 is compatible with the following models. Always confirm fitment using the correct parts diagram for your exact model and serial number.
| Model | Component |
|---|---|
| Impact X 540 I | Filter |
| Impact X 440 | Filter |
| Impact X 410 | Filter |
When replacing the filter, inspect these related components for wear or damage.
If the filter was clogged or damaged, the tip may have debris; clean or replace.
Check the tip guard and seal for wear or leakage.
If debris passed through, inspect the pump's valves and seals.
Copyright © 2024 AlltitanParts.com - All Rights Reserved.
