OEM replacement siphon assembly (Part No. 2431199) for the Titan / SprayTech Impact X 410 electric airless paint sprayer. This genuine Titan part draws coating material from the supply container into the pump inlet and incorporates an integrated strainer to filter debris before it can reach the fluid section, spray tip, or pump packings. Restores reliable priming, consistent pressure, and steady fluid delivery on an Impact X 410 that is struggling to prime, losing suction, or producing a surging spray pattern.
| Part Number | 2431199 |
| Part Description | Siphon Assembly with integrated strainer |
| Brand | Titan Tools Inc. / SprayTech |
| Fits | Impact X 410 Electric Airless Sprayer |
| Condition | New — Genuine OEM |
| Sourced From | Titan Tools Inc. (Authorized dealer) |
✔ Genuine OEM Titan part · ✔ Fast shipping · ✔ Authorized Titan dealer · Questions? Call (713) 931-0006
The Titan 2431199 is a genuine OEM siphon assembly designed exclusively for the Impact X 410 electric airless paint sprayer. It is the primary fluid intake component of the sprayer — the assembly that draws coating material from your supply container, filters it through an integrated strainer, and delivers clean fluid to the pump inlet. When this assembly is clogged, cracked, or failing to seal, the result is a sprayer that struggles to prime, loses suction mid-job, surges in pressure, or spits at the gun. Replacing it with a genuine Titan OEM part restores full fluid delivery, reliable priming, and consistent spray output.
| Field | Detail |
|---|---|
| Part number | 2431199 |
| Part description | Siphon Assembly with integrated strainer |
| Brand | Titan Tools Inc. / SprayTech |
| Fits sprayer | Impact X 410 Electric Airless Sprayer (skid & cart models) |
| Condition | New — Genuine OEM Titan part |
| Sourced from | Titan Tools Inc. (authorized dealer) |
| Retail price | $136.50 |
| Our price | $122.30 (save $14.20 — 10.4% off) |
| Sprayer model | Max PSI | Application |
|---|---|---|
| Impact X 410 (Skid) | 3,300 PSI | Residential, property maintenance, small commercial |
| Impact X 410 (Cart) | 3,300 PSI | Residential, property maintenance, small commercial |
Always verify part fitment against your sprayer's parts diagram before ordering. Call (713) 931-0006 if you need confirmation.
| Function | How it works |
|---|---|
| Fluid pickup | Extends into the paint container and draws coating material upward through suction created by the pump piston |
| Filtration | Integrated strainer removes debris, dried paint particles, and contaminants before they reach the pump packings, piston, cylinder, or spray tip |
| Air seal | Seals against the pump inlet to prevent air ingestion — a broken seal causes loss of prime, pressure pulsing, and gun spitting |
| Component protection | By straining contaminants at the source, a healthy siphon assembly dramatically extends the service life of pump packings, cylinder, and spray tip |
| Symptom | Likely cause in siphon assembly |
|---|---|
| Sprayer won't prime or loses prime repeatedly | Air leak at the pump inlet seal — tube cracked or sealing surface worn |
| Surging pressure or pulsing spray output | Partially clogged strainer restricting fluid flow — pump starving intermittently |
| No fluid delivery despite full container | Fully blocked strainer or severely cracked tube preventing suction |
| Visible cracks or splits in the siphon tube | Physical damage from impact, brittleness, or solvent degradation |
| Strainer heavily fouled and cannot be cleaned | End-of-life strainer element — cleaning no longer restores adequate flow |
| Gun spitting or inconsistent fan pattern | Air ingestion from a failed pump inlet seal on the siphon assembly |
| Specification | Value |
|---|---|
| Max working pressure | 3,300 PSI (22.8 MPa) |
| Max flow rate | 0.47 GPM (1.78 LPM) |
| Max tip size (1 gun) | 0.021" |
| Motor | DuraLife™ HE Brushless (maintenance-free) |
| Fluid section | MaxFX — tool-free field replacement |
| Pressure control | Logix™ Adaptive (tip-sensing technology) |
| Cylinder | PermaLife™ (never wears out) |
| Packings | Self-Adjusting Quad+™ |
| Applications | Stains, lacquers, enamels, latex, low–medium viscosity coatings |
| Step | Action |
|---|---|
| 1 | Turn the sprayer OFF and relieve system pressure using the PRIME/SPRAY valve before beginning |
| 2 | Disconnect the existing siphon assembly from the pump inlet fitting by unscrewing or unclipping per the parts diagram |
| 3 | Inspect the pump inlet fitting for debris, scoring, or damage — clean thoroughly before installing the new assembly |
| 4 | Connect the new Titan 2431199 siphon assembly to the pump inlet — ensure the seal seats flush and the connection is tight |
| 5 | Place the siphon tube fully into the paint container so the strainer end is submerged below the fluid level |
| 6 | Prime the sprayer per the manual — confirm steady fluid draw, consistent pressure, and no spitting at the gun before use |
Always follow your Titan Impact X 410 service manual. Need help? Call (713) 931-0006 Mon–Fri 8AM–5PM CST.
| Part | Why inspect / replace together |
|---|---|
| Return hose (2431662) | Works with the siphon assembly during priming; inspect for cracks or kinks that affect system performance |
| Inlet screen (710-046) | 10-mesh filter at the fluid inlet — if the siphon strainer failed, the inlet screen may also be contaminated |
| Return tube clip (0327226) | Secures the return tube to the siphon tube — check for cracks or looseness when replacing the siphon assembly |
| Fluid section packings | If the pump operated with a contaminated siphon for an extended period, inspect packings for accelerated wear |
| Pump filter element | Clean or inspect when replacing the siphon assembly — both filter the same fluid path |
Part 2431199 is a genuine OEM siphon assembly for the Titan Impact X 410 electric airless paint sprayer. It is the fluid intake component — a tube with an integrated strainer — that draws coating material from your paint container into the pump inlet. It is sourced directly from Titan Tools Inc. and designed as an exact fit replacement for the original factory assembly.
Part 2431199 is specifically designed for the Titan Impact X 410 electric airless sprayer in both skid and cart configurations. It is not confirmed as a direct fit for other Impact series models (e.g. Impact 410, Impact 440, Impact X 440), which use different siphon assemblies or siphon tubes. Always cross-reference with your sprayer's parts diagram or call (713) 931-0006 to confirm fitment before ordering.
Replace the siphon assembly when you notice any of these symptoms on your Impact X 410:
Yes — in many cases a clogged strainer can be cleaned with the appropriate solvent and a soft brush, and this is always worth trying first. However, replacement of the complete siphon assembly is recommended when the strainer mesh is torn or collapsed, the siphon tube is cracked, brittle, or physically damaged, or the sealing surface at the pump inlet connection is worn and no longer creates a vacuum-tight fit. Cleaning a damaged assembly will not restore reliable performance.
Part 2431199 sold by AllTitanParts.com is a genuine OEM part sourced directly from Titan Tools Inc. AllTitanParts.com is an authorized Titan dealer. This is not an aftermarket or third-party substitute — it is the exact same assembly supplied by Titan for factory repair and field service on the Impact X 410.
When the siphon assembly has been clogged, cracked, or leaking, it's best practice to also inspect:
We offer fast shipping on all in-stock parts from our Houston, TX location (5250 Gulfton St, Suite 1H). We stock thousands of Titan parts and aim to get your sprayer back on the job as quickly as possible. Call (713) 931-0006 for urgent order enquiries.
Different Impact models use different siphon components. For example, the Impact 400 and Impact 410 use siphon tube 705-054, while the Impact X 410 uses this complete siphon assembly 2431199. The most reliable way to identify the correct part is to use the AllTitanParts.com parts diagram tool, or call (713) 931-0006 with your sprayer model number and we'll identify the correct part for you.
We offer a standard return window on qualifying orders. Please contact us before returning any item. Reach our team at [email protected] or call (713) 931-0006 Mon–Fri 8AM–5PM CST to initiate a return or discuss any order issue.
Copyright © 2024 AlltitanParts.com - All Rights Reserved.
