2424932 Filter Core is a genuine OEM replacement filter element for Titan airless sprayers. This filter core captures contaminants, dried coating particles, and debris before they reach the spray tip, ensuring a clean finish and preventing tip clogging. A clogged or damaged filter core reduces flow, causes poor atomization, and can lead to uneven spray patterns. Replacing the filter core restores proper fluid filtration and consistent coating quality.
| Part Number | 2424932 |
|---|---|
| Part Description | Filter Core (mesh screen / filter element) |
| Brand | Titan |
| Fits | Impact X 540i, 440, 410 |
| Condition | New |
The Titan 2424932 Filter Core is a fine‑mesh screen element that installs in the fluid filter housing of compatible Impact X sprayers. Its purpose is to trap particles, lumps, and debris that could clog the spray tip, damage internal seals, or produce surface defects in the finish. Regular replacement of the filter core is essential for maintaining optimal flow and spray quality.
Over time, filter cores become loaded with contaminants, reducing flow rate and causing pressure drop. A severely clogged filter core can starve the spray tip, leading to spitting, uneven pattern, or complete blockage. Replacing the filter core with an OEM part ensures the correct mesh size and material compatibility with coatings and solvents.
| Contaminant capture | Traps particles, dried coating, and debris before the tip |
|---|---|
| Tip protection | Prevents tip clogging and extends tip life |
| Finish quality | Eliminates spits, streaks, and surface defects caused by debris |
| Reduced flow / pressure drop | Sprayer seems weak or tip output decreases |
|---|---|
| Frequent tip clogging | Tips clog repeatedly despite clean material |
| Visible debris on filter | Inspection shows heavy loading or damage |
| Routine maintenance | Replace after a set number of gallons or each job |
Part 2424932 is the OEM filter core for the following Titan sprayer models. Always verify with your machine's parts diagram.
| Brand / Model | Component |
|---|---|
| Impact X 540i | Filter Core |
| Impact X 440 | Filter Core |
| Impact X 410 | Filter Core |
When replacing the filter core, inspect or replace these related components.
Inspect for cracks, wear, or damage to the housing that holds the filter core.
If the filter was heavily loaded, the tip may also be partially clogged; clean or replace.
The pump inlet strainer provides coarse filtration; inspect and clean regularly.
Copyright © 2024 AlltitanParts.com - All Rights Reserved.
