Titan 2418852 Gun Extension 30" Packaged (Replaces Titan 651-073)
Reach farther with the Titan 2418852 Gun Extension 30" Packaged, listed as replacing Titan 651-073. This lightweight aluminum extension fits compatible 7/8-inch-thread airless guns. Choose it for added tip reach, and confirm connections, guard arrangement, and complete system pressure ratings before use.
Selection Note: Rated to 3,600 PSI. Verify the gun’s 7/8-inch × 14 connection and follow the lowest working-pressure rating of all connected components.
Add Reach with Titan 2418852 Gun Extension 30" Packaged
Position your spray tip farther from your hand with the Titan 2418852 Gun Extension 30" Packaged (Replaces Titan 651-073). This aluminum accessory adds reach to a compatible airless gun. Select it according to the gun connection, available working space, coating requirements, and pressure ratings of the complete spraying setup.
What Does the 30-Inch Gun Extension Do?
The extension carries coating from the gun to a tip positioned farther away. It changes the operator’s reach and the location of the spray outlet.
Maintain the recommended tip-to-surface distance and a stable working position. Additional reach does not remove the need for suitable access equipment or careful control of the outlet.
Inspect the Extension Before Use
Tube condition: Check for bends, cracks, dents, or other damage.
Connections: Examine threads and sealing areas for damage or contamination.
Guard and tip: Confirm a suitable, secure arrangement with the required seals.
Complete setup: Follow the accessory instructions and do not improvise extension combinations or fittings.
Setup, Cleaning & Safe Handling
1. Relieve pressure. Follow the sprayer’s procedure before installing, removing, or adjusting the extension.
2. Assemble correctly. Use the specified connections, seals, guard, and tip. Do not force mismatched threads.
3. Check the system. Follow the prescribed priming and inspection procedure. Never check a pressurized leak with your hand.
4. Control the outlet. Keep the extended tip pointed away from people and remain aware of its position beyond the gun.
5. Clean and store carefully. Flush with compatible fluid, relieve pressure before disconnection, and protect the tube and threads from damage.
Order Titan 2418852 Gun Extension 30" Packaged
Choose Titan 2418852 from AllTitanParts after confirming your gun connection and system requirements. For assistance, provide the gun model, connection details, sprayer pressure rating, and intended application.
Frequently Asked Questions
Helpful answers about extension selection and compatibility.
What is Titan 2418852?
It is Titan’s packaged 30-inch aluminum airless gun extension.
Does it replace Titan 651-073?
It is listed with that replacement reference. Confirm the current 30-inch specification and installed gun connection when replacing an older extension.
What thread does it use?
Titan specifies standard 7/8-inch × 14 threads for this extension range. Check the actual gun outlet and sealing arrangement.
What is its maximum working pressure?
3,600 PSI. The assembled setup must remain within the lowest rating of every connected component.
Does the pump model alone determine fitment?
The installed gun connection is essential. Verify the complete system ratings and approved accessory arrangement as well.
Are the gun and spray tip included?
Do not assume either is included. Confirm the current packaged extension contents, including guard and seals, with the supplier.
Can I remove the extension after switching the pump off?
Complete the manufacturer’s pressure-relief procedure first. Switching off the pump does not by itself establish that the system is depressurized.
No reviews yet. Be the first to review this product!