Titan 2418851 Gun Extension 20" Packaged (Replaces Titan 651-072)
Add reach to your painting setup with the Titan 2418851 Gun Extension 20" Packaged, listed as replacing Titan 651-072. This lightweight aluminum extension suits compatible 7/8-inch-thread airless guns. Confirm the connection, guard arrangement, and system pressure ratings before preparing your next coating project.
Selection Note: Rated to 3,600 PSI. Verify the gun’s 7/8-inch × 14 connection and observe the lowest pressure rating of all connected components.
Extend Your Reach with Titan 2418851 Gun Extension 20" Packaged
Bring the spray tip farther from your hand with the Titan 2418851 Gun Extension 20" Packaged (Replaces Titan 651-072). This aluminum accessory adds reach to a compatible airless spray gun. Choose it for a setup that matches your working position, gun connection, coating requirements, and complete system ratings.
What Does the 20-Inch Gun Extension Do?
The extension carries coating from the compatible gun connection to a tip positioned farther away. This changes the operator’s reach and the location of the spray outlet.
Maintain the correct tip-to-surface distance and a stable working position. Additional reach does not remove the need for suitable access equipment or careful control of the spray outlet.
Inspection & Replacement Guidance
Check the extension: Inspect for damage, bent sections, cracks, and compromised threads before use.
Check the connections: Confirm matching threads, correct seals, and the specified guard arrangement.
Check the complete setup: Verify ratings and clearances, and follow the manufacturer’s instructions for any additional swivel or shutoff accessory. Do not improvise extension combinations.
Setup, Cleaning & Safe Handling
1. Prepare the system. Follow the sprayer’s pressure-relief procedure before installing, removing, or adjusting the extension.
2. Assemble as specified. Fit the approved connections, seals, guard, and tip according to the relevant instructions.
3. Check operation. Follow the manufacturer’s priming and inspection procedure. Never check a pressurized leak with your hand.
4. Control the outlet. Keep the tip pointed away from people and maintain awareness of its position beyond the gun.
5. Flush and store correctly. Use compatible cleaning fluid, relieve pressure before disconnection, and protect the extension’s threads and tube from damage.
Order Titan 2418851 Gun Extension 20" Packaged
Prepare your next spraying setup with Titan 2418851 from AllTitanParts. For compatibility assistance, provide the gun model, connection details, sprayer pressure rating, and intended application.
Frequently Asked Questions
Helpful answers about extension selection and compatibility.
What is Titan 2418851?
It is Titan’s packaged 20-inch aluminum airless gun extension.
Does it replace Titan 651-072?
It is listed with that replacement reference. Confirm the current package and compatibility with the installed gun before ordering.
What thread does it use?
Titan specifies standard 7/8-inch × 14 threads for this extension range. Verify the actual gun connection and sealing arrangement.
What is its pressure rating?
3,600 PSI. The complete spraying setup must remain within its lowest component rating.
Can compatibility be determined from the sprayer model alone?
The installed gun connection is essential. Also verify the complete system ratings and manufacturer-approved accessory arrangement.
Is a spray tip included?
Do not assume a tip is included. Confirm the current packaged contents, including the guard and seals, with the supplier.
Can I remove it immediately after switching the pump off?
Complete the manufacturer’s pressure-relief procedure first. Switching off the pump does not by itself establish that the gun, hose, and extension are depressurized.
No reviews yet. Be the first to review this product!
