2414185 Hydra-X 7230 Outlet Valve Assembly Service Kit is a genuine OEM replacement service kit for Titan Hydra‑X airless sprayers. This kit contains all necessary components to rebuild the outlet valve (discharge valve) assembly, including the valve seat, ball, o‑rings, and seals. A worn or leaking outlet valve causes pressure loss, surging, reduced output, and poor spray performance. Rebuilding the outlet valve with this service kit restores proper sealing, consistent pressure, and reliable operation.
| Part Number | 2414185 |
|---|---|
| Part Description | Hydra‑X 7230 Outlet Valve Assembly Service Kit (includes seat, ball, o‑rings, seals) |
| Brand | Titan |
| Fits | Hydra X: 4540, 7230 |
| Condition | New |
The Titan 2414185 Hydra‑X 7230 Outlet Valve Assembly Service Kit provides all OEM components needed to rebuild the outlet (discharge) valve of compatible Hydra‑X sprayers. The outlet valve is located on the high‑pressure side of the pump and opens during the downstroke to allow pressurized material to flow toward the gun, then closes to prevent backflow from the hose. A properly functioning outlet valve is critical for maintaining steady spray pressure and preventing pressure decay when the gun trigger is released.
Over time, the outlet valve seat can erode from abrasive materials, the sealing ball can become worn or misshapen, and o‑rings can harden or crack. Symptoms include pressure loss while spraying, surging pressure, inability to reach maximum pressure, and material leaking back through the pump. Rebuilding the outlet valve with this genuine Titan service kit restores a positive seal, consistent pressure output, and reliable spray performance.
| Pressure delivery | Opens on downstroke to send material to the gun |
|---|---|
| Backflow prevention | Closes when pump retracts to keep pressure in the hose |
| Pressure stability | Prevents pressure drop during trigger release and standby |
| Pressure loss under load | Pressure drops significantly while spraying |
|---|---|
| Pressure surging | Fluctuating pressure with no change in trigger position |
| Cannot reach max pressure | Sprayer fails to achieve rated pressure even with tip removed |
| Visible wear / debris | Scored seat, flattened ball, or damaged o‑rings |
The 2414185 service kit is designed for the following Titan Hydra‑X airless sprayer models. Always verify with your machine's parts diagram.
| Brand / Model | Component |
|---|---|
| Hydra X 4540 | Outlet Valve Assembly Service Kit |
| Hydra X 7230 | Outlet Valve Assembly Service Kit |
When rebuilding the outlet valve, inspect or replace these additional components.
Rebuild the inlet valve at the same time to ensure balanced pump performance.
Worn packings can mimic outlet valve symptoms; inspect for fluid bypass.
Ensure the pressure sensing component is accurate and not clogged.
Copyright © 2024 AlltitanParts.com - All Rights Reserved.
