Titan 2412277K Hydra X 7230 High-Pressure Airless Sprayer
TITAN HIGH-PRESSURE HYDRAULIC AIRLESS SPRAYER
Titan 2412277K Hydra X 7230 High-Pressure Airless Sprayer is the 50-State Kohler base configuration built for demanding professional coatings. Delivering 3.0 GPM at up to 7,250 PSI, it supports a .057-inch one-gun tip for silicone, epoxy and elastomeric applications.
Built for roofing and protective-coating contractors, this Kohler-powered Hydra X 7230 combines HydraStroke Technology, a Severe Service fluid section, electric AutoLift and dual-fan hydraulic cooling. It is the base machine; the related 2424561K is Titan's Kohler 250-foot complete configuration.
| Detail | Technical / Commercial Information |
|---|---|
| Product Overview | Titan 2412277K is the Kohler-powered Hydra X 7230 / 7250 PSI base high-pressure airless spraying unit. Titan identifies K-suffix Hydra X machines as 50-State Kohler configurations. The 7230 delivers up to 3.0 GPM / 11.4 LPM at 7,250 PSI / 49.9 MPa and supports a .057-inch maximum one-gun tip. |
| Function | HydraStroke Technology uses electronically controlled hydraulics to drive Titan's Severe Service fluid section. Its five-inch slow-stroking piston is engineered to develop the pressure required for difficult coatings while minimizing stroke frequency. The 7230 operates at approximately 23 cycles per gallon with 162 cc volumetric flow per double stroke. |
| Industrial Applications | Designed for commercial roofing, industrial protective coatings, waterproofing and other high-pressure professional applications. Titan specifically positions the Hydra X 7230 for hard-to-atomize silicone, epoxy and elastomeric coatings. Its output and pressure suit large-scale projects where lower-pressure conventional airless equipment may not provide the required atomization. |
| Accurate Compatible Titan Machines | 2412277K is a complete Hydra X 7230 base spraying unit, not a replacement component for another Titan machine. Related 7230 configurations include 2412277 49-State Honda, 2412277X 50-State Honda, 2424561 49-State Honda 250-foot complete, 2424561X 50-State Honda 250-foot complete and 2424561K Kohler 250-foot complete. Hydra X 4540 models share the platform but use the higher-flow 4540 fluid-section configuration. |
| Accurate Part Number | Titan 2412277K — Hydra X 7230 / 7250 PSI, 50-State Kohler base configuration. Titan specifies 3.0 GPM / 11.4 LPM maximum delivery, 7,250 PSI maximum operating pressure, .057-inch maximum one-gun tip, .035-inch maximum tips per gun for two-gun operation, 23 cycles per gallon and 162 cc displacement per double stroke. |
| Compatible Parts & Assemblies | The 2412277K integrates Titan's HydraStroke hydraulic system, Hydra X 7230 Severe Service fluid section, Kohler engine, electric AutoLift, quick-removal fluid-section system, dual hydraulic cooling fans, automotive-style radiator, six-gallon hydraulic reservoir and heavy-duty cart with 12-inch pneumatic tires. Titan identifies Kohler engine P/N 2441285A for K-suffix Hydra X configurations. |
| Related Parts Commonly Serviced Together | Related maintenance areas include the Severe Service fluid-section packings, piston and inlet/outlet valve components, hydraulic oil and filtration system, cooling fans and radiator, hydraulic drive components, AutoLift mechanism and Kohler engine service items. Any installed spray gun, hose, tip, guard and fittings must be inspected and appropriately rated for the system's high operating pressure. |
| Common Problems Solved | Provides high atomization pressure for silicone, epoxy and elastomeric materials that can be difficult to spray with lower-pressure equipment. Direct immersion simplifies material supply, AutoLift reduces physical effort when changing drums or pails, and the quick-removal fluid section allows one technician to service the fluid section on the jobsite without specialized lifting equipment. |
| Use with Coating Systems | Titan recommends the Hydra X 7230 primarily for silicone, epoxy and elastomeric materials and describes the Hydra X platform as capable of handling heavy- and light-bodied coatings. Coating preparation, filtration, operating pressure and spray-tip selection should follow the material manufacturer's requirements. All downstream equipment must have a working-pressure rating appropriate for the Hydra X system. |
| OEM & Brand Information | 2412277K is genuine Titan Tool Hydra X professional spraying equipment. Titan's current operation manual identifies the K suffix as a 50-State Kohler engine configuration and specifies Kohler engine P/N 2441285A. The machine retains Titan's HydraStroke, Severe Service, AutoLift and modular Hydra X technologies while substituting the Kohler power source for the Honda configurations. |
| Commercial Benefits | The 2412277K combines 7,250 PSI pressure, 3.0 GPM output, multi-gun capability and a 50-State Kohler engine configuration for professional roofing and protective-coating work. Titan states that the Hydra X 7230 can operate up to five guns. AutoLift, modular fluid sections, efficient cooling and field-serviceable pump access are designed to improve productivity on large projects. |
Contractor Selection Insight
Choose 2412277K when you need Hydra X 7230 high-pressure performance with Titan's 50-State Kohler engine configuration. The 7230 prioritizes atomization pressure, delivering 7,250 PSI at 3.0 GPM for demanding silicone, epoxy and elastomeric coatings. This is the base machine rather than the factory 250-foot spray package; contractors wanting the Kohler-powered Hydra X 7230 supplied as the 250-foot complete configuration should select 2424561K.
FAQ Section
Key answers for contractors evaluating the Kohler-powered Titan Hydra X 7230.
No reviews yet. Be the first to review this product!
