Titan part 2404445 is a package inner feed roller used to advance material from the hopper or cup into the pump on compatible Titan airless sprayers. Common applications include roller‑fed spray systems where consistent material delivery is critical for smooth operation.
| Part Number | 2404445 |
|---|---|
| Part Description | Package Inner Feed Roller |
| Brand | Titan |
| Fits |
|
| Condition | New |
The Titan 2404445 Package Inner Feed Roller is an OEM replacement component designed for Impact and Elite series airless sprayers. This feed roller draws material from the container (hopper, cup, or pail) and delivers it to the pumping section, ensuring a steady supply for continuous spraying.
Over time, feed rollers can wear, crack, or become glazed, causing material starvation, erratic output, or complete loss of prime. Replacing the inner feed roller restores proper material pickup and consistent spray performance.
| Material pickup | Draws coating from container into the pump |
|---|---|
| Consistent feed | Maintains steady flow to prevent pulsation or starvation |
| Wear resistance | Engineered polymer or rubber withstands abrasive materials |
| Worn or glazed surface | Roller no longer grips material; slips or spins freely |
|---|---|
| Cracks or chunks missing | Visible damage from hard particles or chemical attack |
| Loss of prime / no material pickup | Sprayer runs but will not draw material from container |
| Erratic output | Spray pressure fluctuates or stops intermittently |
Titan part 2404445 is a direct replacement inner feed roller for the following sprayer models. Verify that your sprayer uses a roller‑type feed system before ordering.
| Brand / Model | Components |
|---|---|
| Impact 1140 | Package Inner Feed Roller |
| Impact 840 | Package Inner Feed Roller |
| Impact 640 | Package Inner Feed Roller |
| Impact 440 | Package Inner Feed Roller |
| Impact X 540i | Package Inner Feed Roller |
| Impact X 440 | Package Inner Feed Roller |
| Impact X 410 | Package Inner Feed Roller |
| Impact 1140 I | Package Inner Feed Roller |
| Impact 1140 IA | Package Inner Feed Roller |
| Impact 740 | Package Inner Feed Roller |
| Impact 640 I | Package Inner Feed Roller |
| Impact 640 IA | Package Inner Feed Roller |
| Impact 840 I | Package Inner Feed Roller |
| Impact 840 IA | Package Inner Feed Roller |
| Elite 5500 | Package Inner Feed Roller |
| Elite 3500 | Package Inner Feed Roller |
| Elite 3000 | Package Inner Feed Roller |
| Elite 2000 | Package Inner Feed Roller |
When replacing the inner feed roller, inspect or replace these associated components for a complete repair.
Cracks or clogs in the feed tube can mimic roller failure. Inspect and replace if damaged.
Worn bearings or a bent shaft can cause uneven roller wear. Check for play or noise.
Leaking seals can allow air into the feed system. Replace any that are hard or cracked.
Copyright © 2024 AlltitanParts.com - All Rights Reserved.
