Part number 2402364 is an elbow swivel fitting, sized 1/4 NPTF x 1/4 NPSM. This hydraulic or fluid component provides a 90-degree directional change in a line while allowing the attached hose or tube to rotate, preventing kinks and relieving strain. It is compatible with Powerliner 4500 service and Powerliner 5500 sprayers. The fitting is designed to handle system pressures and facilitate easier routing and connection of fluid lines.
| Part Number | 2402364 |
|---|---|
| Part Description | Elbow Swivel, 1/4 NPTF X 1/4 NPSM |
| Fits | PowrLiner 4500 service; PowrLiner 5500 |
| Condition | New |
Part number 2402364 is an elbow swivel fitting with 1/4 inch NPTF (National Pipe Taper Fuel) male threads on one end and 1/4 inch NPSM (National Pipe Straight Mechanical) female threads on the other. This fitting combines a fixed 90-degree elbow with a rotating swivel joint, allowing for flexible hose or tube routing while maintaining a sealed connection at high pressure.
This fitting is compatible with Powerliner 4500 service and Powerliner 5500 sprayers, where it is commonly used in hydraulic or high-pressure fluid systems. A failed swivel can cause a rigid connection that leads to hose fatigue, leaks at the threads, or difficulty during assembly and disassembly. Replacing it restores flexible, leak-free fluid routing.
| Direction Change | Provides a 90-degree turn for fluid lines in tight spaces. |
|---|---|
| Strain Relief | The swivel joint allows attached hoses to move slightly, preventing kinks and reducing stress on connections. |
| Ease of Assembly | Allows the hose end to be oriented correctly without twisting the entire hose. |
| Pressure Containment | Designed to seal and contain system fluid at the operating pressures of the sprayer. |
| Fluid Leak | Visible seepage from the swivel joint or threaded connections. |
|---|---|
| Restricted Movement | Swivel is seized, stiff, or will not rotate freely. |
| Physical Damage | Cracks, stripped threads, or deformation of the fitting body. |
| During Hose Replacement | Best practice to replace old fittings when installing a new hose assembly. |
The elbow swivel fitting part 2402364 is designed for the following Powerliner sprayer models.
| Compatible Sprayer Models | Component |
|---|---|
| PowrLiner 4500 service | Elbow Swivel, 1/4 NPTF x 1/4 NPSM |
| PowrLiner 5500 | Elbow Swivel, 1/4 NPTF x 1/4 NPSM |
This fitting is part of a larger fluid conveyance system. These related parts are often serviced concurrently.
The flexible line that connects to the swivel fitting; often replaced if the fitting is leaking or damaged.
The seal for the NPSM connection; should always be replaced when reinstalling a fitting.
Other fittings in the same circuit that may also be subject to wear and pressure.
Copyright © 2024 AlltitanParts.com - All Rights Reserved.
