Titan part 2402215 is a tip insert orifice with a 0.059-inch diameter used in the spray tip assembly of compatible PowrLiner line stripers. It determines the fluid flow rate and line width for precise striping applications. A worn or damaged orifice can cause inconsistent line width, poor pattern quality, or reduced productivity. Replacing the orifice restores accurate flow control and crisp, uniform stripes.
| Part Number | 2402215 |
|---|---|
| Part Description | Tip Insert Orifice 0.059" |
| Brand | Titan |
| Fits | PowrLiner 4500, 5500, Elite 5500 |
| Condition | New |
The Titan 2402215 Tip Insert Orifice is a precision component designed to control fluid flow and line width in PowrLiner line striping machines. With a 0.059-inch orifice diameter, it provides a specific flow rate that, when combined with the spray tip, produces consistent stripe widths and uniform coverage. This insert is a direct replacement for the original orifice in compatible PowrLiner models.
Over time, the orifice can wear from abrasive materials, become clogged with dried paint, or sustain damage from improper cleaning. A worn or damaged orifice results in inconsistent stripe width, uneven pattern quality, or reduced striping speed. Replacing the orifice with this genuine Titan part restores the intended flow characteristics and ensures professional‑grade striping results.
| Flow control | Regulates the volume of paint or marking fluid delivered through the spray tip |
|---|---|
| Line width determination | Works with the spray tip fan angle to produce the desired stripe width |
| Pattern consistency | Ensures uniform flow for smooth, even stripe application |
| Inconsistent line width | Stripe width varies or does not match the expected measurement |
|---|---|
| Poor pattern quality | Spray pattern is uneven, has tails, or is distorted |
| Visible wear or damage | Orifice shows signs of enlargement, nicks, or clogging that cleaning cannot resolve |
| Reduced productivity | Striper requires slower speed to maintain acceptable line quality |
Titan part 2402215 is a direct replacement tip insert orifice for the following PowrLiner line striping machines. Always verify fitment using the parts diagram for your exact model.
| Model | Component |
|---|---|
| PowrLiner 4500 | Tip insert orifice 0.059" |
| PowrLiner 5500 | Tip insert orifice 0.059" |
| Elite 5500 | Tip insert orifice 0.059" |
When replacing the tip insert orifice, inspect these related components to ensure optimal striping performance.
The tip body and retaining nut that hold the orifice; inspect for wear or damage.
The seal between the tip and the gun; replace if leaking to maintain pressure.
Check for consistent triggering and flow control if pattern issues persist.
Copyright © 2024 AlltitanParts.com - All Rights Reserved.
