Titan part 2393123 is a suction system set – a complete assembly that draws paint from the container into the pump on compatible airless sprayers. The set typically includes the suction tube, strainer, gaskets, and fittings. Replace a cracked, clogged, or air‑leaking suction system to restore proper priming, eliminate cavitation, and ensure consistent material flow on Elite 3000 units.
| Part Number | 2393123 |
|---|---|
| Part Description | Suction System Set |
| Brand | Titan |
| Fits |
|
| Condition | New |
The Titan 2393123 Suction System Set is a complete replacement assembly for the fluid intake system on the Elite 3000 airless sprayer. It includes the suction tube (pickup tube), a coarse strainer or filter, sealing gaskets, and any necessary fittings to connect to the pump inlet. This assembly draws paint from the container into the pump, preventing debris from entering the fluid section and ensuring a steady supply of material.
Over time, the suction tube can crack, the strainer can become clogged or torn, or the gaskets can harden and leak air. A damaged suction system causes poor priming, loss of prime during operation, cavitation (pump runs rough), or reduced pressure. Replacing the suction system set with a genuine Titan 2393123 restores reliable priming, protects the pump from debris, and ensures consistent paint flow on the Elite 3000.
| Draws paint into pump | Transfers material from container to fluid section |
|---|---|
| Filters debris | Coarse strainer prevents large particles from entering pump |
| Seals against air leaks | Gaskets ensure air‑tight connection for proper prime |
| Cracked suction tube | Visible cracks or holes causing air ingestion |
|---|---|
| Clogged or torn strainer | Debris passes through or flow is restricted |
| Air leaks / poor priming | Sprayer loses prime, runs rough, or won't draw paint |
| Missing or hardened gaskets | Seals no longer provide air‑tight connection |
Titan part 2393123 is compatible with the following airless sprayer. Always confirm fitment using the correct parts diagram for your exact model.
| Brand / Model | Component |
|---|---|
| Elite 3000 | Suction system set |
When replacing the suction system set, inspect these related components.
If the pump lost prime, the inlet valve may also need inspection.
Debris that bypassed a torn strainer could damage packings or valves.
For models with a suction hose, check for cracks or loose fittings.
Copyright © 2024 AlltitanParts.com - All Rights Reserved.
