Titan 2369458 Seal (Replaces Titan 341331)
OEM Titan Pump Sealing Ring
Titan 2369458 Seal is an OEM sealing ring used in the inlet valve body assembly of compatible Elite and PowrLiner sprayers, preventing fluid leaks and maintaining proper suction during pump operation. It replaces the older Titan 341331 sealing ring.
Compatibility Table
A worn or damaged seal causes air ingress and fluid leaks at the inlet, leading to loss of prime, poor suction, and inconsistent spray performance.
Titan Fluid Section Replacement Part
Titan 2369458 Seal for Inlet Valve Body Assembly Service
Titan 2369458 is an OEM sealing ring that provides a fluid-tight seal within the inlet valve body assembly of compatible Elite and PowrLiner sprayers. It replaces the older Titan 341331 sealing ring and is essential for maintaining proper suction and preventing air ingress at the pump inlet.
| Detail | Technical / Commercial Information |
|---|---|
| Product Overview | OEM Titan sealing ring used in the inlet valve body assembly of compatible Elite and PowrLiner sprayers. Listed as "Seal (2)" at position 1 in the PowrLiner 3500 parts diagram. |
| Function | Provides a fluid-tight seal within the inlet valve body assembly, preventing material leaks and air ingress that would disrupt pump suction and priming. |
| Industrial Applications | Professional airless sprayer repair, fluid section maintenance, inlet valve service, and rental fleet refurbishment. |
| Compatible Titan Machines | Elite 3000, Elite 3500, Elite 4500, PowrLiner 3500 / 3500S. |
| OEM Part Number | 2369458 Seal (alternate 02369458; replaces 341331). |
| Compatible Parts & Assemblies | Used within the inlet valve body assembly alongside the inlet valve (2393043), clamp (2369455), and inlet housing (2334383). |
| Related Parts Commonly Serviced Together | Inlet valve, clamp, inlet housing, and other seals in the fluid section should be inspected when replacing the sealing ring. |
| Common Problems Solved | Air ingress at the inlet causing loss of prime, poor suction, fluid leaks, and inconsistent spray performance due to a worn or damaged seal. |
| Target Users / Markets | Painting contractors, pavement marking crews, maintenance technicians, rental fleets, and repair shops running compatible Titan sprayers. |
| OEM & Brand Information | Genuine Titan OEM component designed for correct fit and reliable sealing performance in compatible sprayer fluid sections. |
| Commercial Benefits | Restores proper inlet sealing, eliminates air ingress and fluid leaks, and ensures reliable priming and consistent spray performance. |
The 2369458 Seal is a direct replacement for worn or damaged seals in the inlet valve body assembly of compatible Titan sprayers. During inlet service, inspect the seal for cuts, nicks, flattening, hardening, or compression set. Always replace the seal whenever the inlet valve body assembly is disassembled, as even a visually intact seal may have taken a permanent set. Clean all mating surfaces thoroughly before installation and lubricate the seal with a compatible grease to prevent pinching. A properly seated seal prevents air ingress and ensures reliable material draw.
Frequently Asked Questions
Practical answers for confirming fitment and service value.
No reviews yet. Be the first to review this product!