Titan part 236-007 is a hydraulic cylinder used in the drive system or lift mechanism of compatible PowrLiner, PowrTex, and PowrTwin airless stripers. This cylinder converts hydraulic pressure into linear force to raise, lower, or position components such as the spray bar, bead dispenser, or guide wheels. A worn, leaking, or bent cylinder causes slow operation, loss of lifting capacity, or erratic movement. Replacing with the OEM hydraulic cylinder restores proper force, speed, and system reliability.
| Part Number | 236-007 |
|---|---|
| Part Description | Cylinder Hydraulic |
| Brand | Titan |
| Fits |
|
| Condition | New |
The Titan 236-007 Hydraulic Cylinder is a genuine OEM replacement cylinder used in the hydraulic circuit of PowrLiner, PowrTex, and PowrTwin airless stripers. It converts hydraulic fluid pressure into linear force to perform work such as lifting the spray bar, raising the bead dispenser, or adjusting guide wheels.
Over time, hydraulic cylinders can develop internal seal leaks, suffer from rod scoring, become bent from impact, or corrode from moisture in the hydraulic fluid. A damaged cylinder causes slow or jerky movement, loss of lifting force, fluid leaks, or complete failure of the affected function. Replacing with OEM Titan 236-007 restores proper force, smooth operation, and system reliability.
| Linear actuation | Converts hydraulic pressure into pushing/pulling force |
|---|---|
| Lifts / lowers components | Positions spray bar, bead dispenser, or wheels |
| Holds position | Maintains set position under load |
| System control | Enables precise adjustment of machine functions |
| External fluid leak | Oil seeps from rod seal or fittings |
|---|---|
| Slow or jerky movement | Cylinder moves erratically or hesitates |
| Visible rod damage | Scored, bent, or corroded piston rod |
| Loss of holding force | Cylinder drifts or cannot hold position |
Titan part 236-007 is a direct OEM replacement hydraulic cylinder for the following models. Always verify with your machine's parts diagram.
| Model | Component |
|---|---|
| PowrLiner 4955 | Hydraulic cylinder |
| PowrLiner 6955 | Hydraulic cylinder |
| PowrLiner 8955 | Hydraulic cylinder |
| PowrLiner 4950 | Hydraulic cylinder |
| PowrLiner 6950 | Hydraulic cylinder |
| PowrLiner 8900 XLT SP | Hydraulic cylinder |
| PowrLiner 8900XLT | Hydraulic cylinder |
| PowrLiner 8900 | Hydraulic cylinder |
| PowrTex 6900SF | Hydraulic cylinder |
| PowrTex 12000SV | Hydraulic cylinder |
| PowrTwin 4900 | Hydraulic cylinder |
| PowrTwin 6900 | Hydraulic cylinder |
| PowrTwin 8900 | Hydraulic cylinder |
| PowrTwin 12000 Plus DI | Hydraulic cylinder |
| PowrTwin 8900GH | Hydraulic cylinder |
| PowrTwin 12000GHD | Hydraulic cylinder |
| PowrTwin 12000XLT DI | Hydraulic cylinder |
| PowrTwin 12000XLT | Hydraulic cylinder |
| PowrTwin 12000GH | Hydraulic cylinder |
| PowrTwin TM 8900 XLT | Hydraulic cylinder |
When replacing the hydraulic cylinder, inspect these associated components.
Check for cracks, leaks, or loose connections.
Ensure the valve is functioning and not bypassing.
Change fluid and filter if contamination is suspected.
Copyright © 2024 AlltitanParts.com - All Rights Reserved.
