Titan part 2334383 is an inlet housing designed for use on compatible PowrLiner and Elite sprayers. This housing directs coating material from the suction line into the fluid section, providing a secure mounting point for the inlet valve and strainer. Replacing a cracked, worn, or damaged inlet housing restores proper material flow, prevents air ingestion, and maintains system prime.
| Part Number | 2334383 |
|---|---|
| Part Description | Inlet Housing |
| Brand | Titan |
| Fits | PowrLiner 4500, 3500 72v, 3500 72v (Honda GXE), 3000, 3500s (Suffixed Unit); Elite 3500, 3500 72v, 3000 |
| Condition | New |
The Titan 2334383 Inlet Housing is a genuine OEM component that forms the entry point for material entering the fluid section of compatible PowrLiner and Elite sprayers. It houses the inlet valve assembly and often includes a built‑in strainer or fitting for the suction hose. Precision‑cast for a perfect seal, this housing ensures that material flows smoothly into the pump without air leaks or contamination.
Over time, inlet housings can crack due to overtightening of fittings, freeze damage, or impact. A cracked or warped housing allows air to enter the system, causing loss of prime, erratic spray, and reduced output. Replacing with the correct 2334383 housing restores a tight seal, eliminates air ingestion, and ensures reliable priming and consistent material delivery.
| Material entry | Directs coating material from the suction hose into the fluid section |
|---|---|
| Valve mounting | |
| Air sealing |
| Cracked / broken | Visible cracks, especially around fitting threads or mounting ears |
|---|---|
| Warped / distorted | |
| Loss of prime | |
| Air bubbles in fluid |
Titan part 2334383 is compatible with the following models. Always confirm fitment using the correct parts diagram for your exact model and serial number.
| Model | Component |
|---|---|
| PowrLiner 4500 | Inlet Housing |
| PowrLiner 3500 72v | Inlet Housing |
| PowrLiner 3500 72v (Honda GXE) | Inlet Housing |
| PowrLiner 3000 | Inlet Housing |
| PowrLiner 3500s (Suffixed Unit) | Inlet Housing |
| Elite 3500 | Inlet Housing |
| Elite 3500 72v | Inlet Housing |
| Elite 3000 | Inlet Housing |
When replacing the inlet housing, inspect these associated components for wear or damage.
The housing holds the inlet valve; replace the seat and ball as a set during rebuild.
Clean or replace the strainer to prevent debris from entering the new housing.
Check the hose end and fitting for damage that may have caused overtightening.
Copyright © 2024 AlltitanParts.com - All Rights Reserved.
