Titan 2326336 Service set
Maintain your professional finishing equipment with the Titan 2326336 Service Set, a dedicated maintenance kit for the GM 5000EAC Electrostatic AirCoat Spray Gun. This service set brings together specified replacement wear and sealing components for gun-body, adapter, and handle maintenance. It supports repairs involving fluid sealing, valve operation, and electrostatic contacting components. Ideal for qualified spray equipment technicians, part 2326336 helps streamline scheduled servicing and targeted repairs. Verify the GM 5000EAC model and service-kit contents before ordering. Not intended for the GM 5000EA low-pressure spray gun.
Service Areas: Gun body, adapter, and handle.
Repair Applications: Seals, O-rings, valve components, and electrostatic contacting parts.
Service Note: Electrostatic spray gun maintenance requires appropriate training. Follow the GM 5000EAC manufacturer instructions for pressure relief, power isolation, inspection, and reassembly.
Titan 2326336 Service Set for GM 5000EAC Professional Spray Gun Maintenance
Keep your professional finishing equipment ready for demanding coating applications with the Titan 2326336 Service Set. Designed for the GM 5000EAC Electrostatic AirCoat Spray Gun, this maintenance kit brings together specified service components for the gun body, adapter, and handle assemblies. Its applications include replacing worn seals, O-rings, valve-related parts, and selected electrostatic contacting components during scheduled maintenance or qualified repairs. Rather than treating every sealing or valve problem as a reason to replace the complete spray gun, the 2326336 service set supports targeted servicing of the manufacturer's designated wear components. Whether maintaining industrial finishing equipment, repairing a GM 5000EAC spray gun, or preparing spare parts for planned maintenance, this dedicated service set provides a practical starting point for model-specific repairs.
Titan 2326336 Service Set Compatible Spray Gun
GM 5000EAC Electrostatic AirCoat Spray Gun
Confirmed model: GM 5000EAC
Basic gun part number: 2309871
Manufacturer service-set number: 2326336
The GM 5000EAC manufacturer parts documentation identifies 2326336 as the dedicated service set. AllTitanParts also lists this service set in the GM 5000EAC spray gun, adapter, and handle parts categories.
Compatibility warning: Do not assume this kit fits the GM 5000EA low-pressure spray gun, other GM-series guns, or unrelated Titan piston-pump assemblies. Match the exact model designation and service-kit number before purchasing.
What Does the Titan 2326336 Service Set Repair?
The GM 5000EAC contains interconnected fluid, air, mechanical, and electrostatic components. The Titan 2326336 Service Set is intended for designated service work across these systems.
Gun Body Sealing Components
The spray gun body uses specified O-rings and seals to maintain the intended separation and containment of operating fluids and air. Replacing damaged seals can help correct leakage at the affected interfaces.
Adapter and Fluid-Valve Components
The GM 5000EAC adapter contains fluid-control components that require careful inspection during service. The service set is associated with replacement valve parts, sealing elements, and packing components used in this assembly.
Handle Seals and Wear Parts
The handle assembly contains several small sealing components that can deteriorate or become damaged during operation. A model-specific service set helps technicians identify the appropriate replacement parts.
Electrostatic Contacting Components
Selected kit listings identify electrostatic contacting and resistance-related components. Because these are safety-critical parts, inspection, testing, and replacement must follow the manufacturer's procedures and be performed by qualified personnel.
Titan 2326336 Service Set Component References
The following part numbers are identified in a specialist listing for the GM 5000EAC service set. They are useful when reviewing maintenance requirements or comparing a supplier's kit contents. Confirm the current package contents before ordering because service-kit revisions may differ.
| Part Number | Component Description |
|---|---|
| 2314283 | Contacting AC |
| 9952777 | High Resistance, Bare |
| 9971182 | O-Ring |
| 2308699 | Cover Seal |
| 2313314 | Air Manifold Ring AC |
| 2307180 | Sheathed O-Ring |
| 2312175 | AC Valve Housing, Complete |
| 2312186 | AC Valve Tip, Complete |
| 9974166 | O-Ring |
| 2311562 | Rod Seal |
| 2340024 | Packing |
| 9971025 | O-Ring |
| 2307232 | End Piece Seal |
| 2310692 | Seal |
| 2338853 | Connection Nipple AC |
| 9974218 | O-Ring |
| 2313639 | AC Valve Rod Unit |
| 2326461 | Assembly Instructions |
This is a reference list, not a guarantee of the contents of every kit revision. Confirm the current manufacturer's packing list with the seller.
Benefits of the Titan 2326336 Service Set
When Should the GM 5000EAC Service Set Be Considered?
Scheduled maintenance: The spray gun is due for inspection or replacement of designated wear components under the manufacturer's service program.
Fluid leakage: A qualified technician has identified defective sealing components within the gun or adapter.
Valve wear: Inspection reveals damaged or worn parts in the specified fluid-valve mechanism.
Handle sealing problems: An O-ring or other designated handle seal requires replacement.
Electrostatic-contact concerns: Manufacturer-prescribed inspection identifies a serviceable contacting or resistance-related component requiring replacement.
Multiple wear components: Several kit-covered parts require attention during the same maintenance operation.
Titan 2326336 Service Set Maintenance and Installation Guidance
Important safety requirement: The GM 5000EAC is an electrostatic spray gun. Service work involves both high-pressure coating equipment and electrical safety considerations. Repairs and part replacement should be performed only by a manufacturer-authorized service center or suitably trained personnel.
Step 1: Identify the exact gun. Confirm the GM 5000EAC model designation and the manufacturer's service-set part number 2326336.
Step 2: Review the service manual. Identify the applicable gun-body, adapter, and handle diagrams and determine which components require maintenance.
Step 3: Make the equipment safe. Follow the manufacturer's full shutdown procedure, relieve fluid pressure, prevent accidental triggering, shut off compressed air and energy supplies, and disconnect the control unit from the mains.
Step 4: Inspect the affected assemblies. Qualified personnel should check the specified seals, valve components, contacting elements, and associated surfaces.
Step 5: Verify kit contents. Compare the supplied service set with the applicable manufacturer's parts list and assembly instructions before beginning replacement.
Step 6: Replace designated components. Follow the manufacturer procedures for the individual service parts. Do not improvise electrical-contact repairs or substitute unspecified seals.
Step 7: Complete required checks. Perform the manufacturer's prescribed sealing, functional, grounding, electrical, and spray-performance tests before returning the gun to service.
Step 8: Record the maintenance. Document the serviced assemblies and replaced components for future inspections and repair planning.
Related GM 5000EAC Replacement Parts
The following parts are associated with the GM 5000EAC spray gun and its service assemblies. Confirm whether each item is supplied in your specific kit revision before purchasing it separately.
Buy Titan 2326336 Service Set
Find the Titan 2326336 Service Set at AllTitanParts for GM 5000EAC Electrostatic AirCoat Spray Gun maintenance. Review the model-specific parts categories, confirm the current kit contents, and source the service components needed for qualified repairs.
Shop GM 5000EAC Service PartsFrequently Asked Questions
Answers about Titan 2326336 Service Set compatibility, contents, maintenance, and professional repair requirements.
What is Titan 2326336 Service Set?
It is a dedicated maintenance and replacement-parts set for the GM 5000EAC Electrostatic AirCoat Spray Gun.
Which machine is compatible with Titan 2326336?
The confirmed compatible machine is the GM 5000EAC Electrostatic AirCoat Spray Gun, basic gun part number 2309871.
Is Titan 2326336 compatible with GM 5000EA?
No. The GM 5000EA low-pressure spray gun is a different model. Part 2326336 is identified for the GM 5000EAC.
What components does the service set contain?
Published kit references identify O-rings, seals, valve components, packing, and electrostatic contacting parts. Confirm the current manufacturer's packing list because kit revisions can differ.
Does the service set cover the GM 5000EAC adapter?
Yes. The set is associated with specified adapter components, including valve-related parts and sealing elements.
Can the service set be used for handle maintenance?
Yes. The GM 5000EAC handle service references identify seals and O-rings associated with part 2326336.
Can Titan 2326336 help repair fluid leaks?
It may help when the leak is caused by a worn seal or valve component covered by the service set. A qualified technician must identify the actual cause before repair.
Who should install the GM 5000EAC service set?
The manufacturer requires servicing by an authorized service center or suitably trained personnel. Electrostatic and high-pressure safety procedures must be followed.
Is Titan 2326336 a pump repacking kit?
No. It is a GM 5000EAC spray gun service set, not a general piston-pump repacking kit for Titan Impact or Advantage sprayers.
Where can I buy Titan 2326336 Service Set?
Find Titan 2326336 in the AllTitanParts GM 5000EAC Spray Gun Parts catalog. Confirm availability and the current kit contents before ordering.
No reviews yet. Be the first to review this product!