Titan part 194-113 is a synthetic rubber O‑ring used as a static or dynamic seal on compatible PowrTex and Hydra airless sprayers and pumps. This direct‑replacement O‑ring helps prevent fluid leaks, pressure loss, and air ingress in fluid sections, manifolds, or valve assemblies.
| Part Number | 194-113 |
|---|---|
| Part Description | Synthetic Rubber O‑ring |
| Brand | Titan |
| Fits |
|
| Condition | New |
The Titan 194-113 Synthetic Rubber O‑ring is a genuine OEM seal designed for use in fluid sections, manifold connections, valve assemblies, and other sealing points on PowrTex and Hydra airless sprayers and pumps. The synthetic rubber material offers good resistance to paint solvents, oils, and common coating materials.
A worn, nicked, or hardened O‑ring can cause external leaks, pressure loss, erratic spray performance, or air being drawn into the fluid stream. Replacing a damaged O‑ring with the correct size and material restores a tight seal and reliable operation.
| Fluid sealing | Prevents paint or solvent from leaking at connections and fittings |
|---|---|
| Pressure retention | Helps maintain system pressure for consistent spray output |
| Contamination barrier | Keeps air and debris from entering the fluid path |
| Visible leak from seal area | Dripping or weeping paint/solvent at a fitting or manifold joint |
|---|---|
| Hardened or cracked O‑ring | Rubber has lost elasticity, shows cracks, or feels brittle |
| Nicks or cuts | Physical damage during previous service or from sharp edges |
| Swollen or distorted shape | Chemical incompatibility causing the O‑ring to deform |
Titan 194-113 is compatible with the following models. Always confirm fitment using the parts diagram for your specific machine.
| Brand / Model | Component |
|---|---|
| PowrTex 300dd | Synthetic Rubber O‑ring |
| PowrTex 600dd | Synthetic Rubber O‑ring |
| Hydra M | Synthetic Rubber O‑ring |
| Hydra Pro Super | Synthetic Rubber O‑ring |
When replacing an O‑ring, these related components are often inspected or replaced at the same time to ensure a complete seal repair.
Used with the O‑ring in high‑pressure applications to prevent extrusion. Replace if damaged.
Inspect the sealing groove and mating surfaces for corrosion, nicks, or burrs.
Contaminants that damage O‑rings may also clog filters; inspect and clean or replace.
Copyright © 2024 AlltitanParts.com - All Rights Reserved.
