Titan part 191-324 is a hex fitting used to connect fluid passages, hoses, or components on compatible PowrTwin and PowrBeast airless sprayers. The hex body provides easy wrench engagement for installation and removal, ensuring a secure, leak‑free connection.
| Part Number | 191-324 |
|---|---|
| Part Description | Hex Fitting |
| Brand | Titan |
| Fits |
|
| Condition | New |
The Titan 191-324 Hex Fitting is an OEM threaded connector designed for a wide range of PowrTwin and PowrBeast airless sprayers. It is used to join fluid hoses, pump manifolds, filter housings, or other hydraulic components where a secure, leak‑free seal is required. The hexagonal body allows easy installation with standard wrenches.
Fittings can fail due to cracking, thread damage, corrosion, or seal wear. A damaged fitting may cause fluid leaks, pressure loss, or air ingestion into the pump. Replacing with an OEM hex fitting ensures correct thread type (NPT, straight, etc.), proper material strength, and reliable sealing under high pressure.
| Fluid connection | Joins hoses, pumps, filters, or manifold ports |
|---|---|
| Wrench‑friendly hex body | Provides easy installation and removal without damaging the fitting |
| Pressure sealing | Maintains leak‑free operation under high spray pressures |
| Cracked or broken fitting | Visible damage from overtightening or impact |
|---|---|
| Stripped threads | Fitting spins or will not seal when tightened |
| Corrosion or pitting | Rust or chemical attack that compromises integrity |
| Persistent leakage | Leaks even after replacing seals or retightening |
Titan part 191-324 is a direct replacement hex fitting for the following sprayer models. Confirm thread size and sealing method (tapered vs. O‑ring) using your parts diagram.
| Brand / Model | Components |
|---|---|
| PowrTwin TM 8900 XLT | Hex Fitting |
| PowrTwin 12000GHD | Hex Fitting |
| PowrTwin 12000GH | Hex Fitting |
| PowrTwin 12000XLT | Hex Fitting |
| PowrTwin 8900GH | Hex Fitting |
| PowrTwin 6900GH | Hex Fitting |
| PowrTwin 6900XLT | Hex Fitting |
| PowrTwin 4900GH | Hex Fitting |
| PowrTwin 4900XLT | Hex Fitting |
| PowrTwin 4900 | Hex Fitting |
| PowrTwin 6900 | Hex Fitting |
| PowrTwin 8900 | Hex Fitting |
| PowrTwin 12000 Plus | Hex Fitting |
| PowrBeast 4700 | Hex Fitting |
| PowrBeast 7700 | Hex Fitting |
| PowrBeast 9700 | Hex Fitting |
| PowrBeast 4700T | Hex Fitting |
When replacing a hex fitting, inspect or replace these associated components for a complete repair.
Many fittings use a bonded seal or O‑ring. Replace the seal whenever the fitting is removed.
If the fitting connects to a hose, inspect the hose for cracks or swelling near the connection.
Check the female port for stripped threads or damage that could prevent a new fitting from sealing.
Copyright © 2024 AlltitanParts.com - All Rights Reserved.
