Titan 182-906 Upper Packing Spring
OEM Titan Fluid Section Component
Titan 182-906 Upper Packing Spring is an OEM precision-wound compression spring that maintains constant tension on the upper packings in compatible Admiral, Commander, Hydra M, Hydra Pro Super, and PowrCoat spray systems, ensuring a proper seal around the piston rod and preventing fluid leakage.
Compatibility Overview
Replacement upper packing spring restores proper packing tension, prevents fluid leaks, and extends the life of both packings and piston rod. For related components, see the Titan Air Powered Airless Sprayer Parts collection.
Titan Fluid Section Component Replacement
Titan 182-906 Upper Packing Spring for Admiral, Commander, and PowrCoat Systems
Titan 182-906 is an OEM upper packing spring engineered to maintain constant tension on the upper packings in compatible Admiral, Commander, Hydra M, Hydra Pro Super, and PowrCoat spray systems. In reciprocating pump designs, packings create a dynamic seal around the moving piston rod, preventing high-pressure fluid from escaping into the drive housing. The upper packing spring maintains constant force on these packings, compensating for normal wear and ensuring the seal remains effective throughout the packing's service life. Over time, packing springs can fatigue, lose tension, or break due to millions of compression cycles. A weakened or broken spring can allow packings to relax, leading to fluid leakage past the rod, loss of pressure, and contamination of the drive system with paint or solvent.
| Detail | Technical / Commercial Information |
|---|---|
| Product Overview | OEM Titan precision-wound compression spring used in the fluid sections of Admiral, Commander, Hydra M, Hydra Pro Super, PowrCoat, Big 440, and HydraPro III spray systems. Maintains constant tension on upper packings for effective sealing. |
| Function | Maintains constant pressure on packings for effective sealing. Compensates for normal packing wear to maintain seal integrity. Prevents fluid from escaping past the piston rod. Helps maintain system pressure by containing fluid. The spring's precise spring rate and free length are engineered to provide optimal sealing force without excessive friction. |
| Compatible Systems | Admiral 830-331, 860-451, 830-451, 941-441; Commander 741-440, 761-301, 761-411, 741-331; Hydra M; Hydra Pro Super; PowrCoat 730, 745, 940, 960, 975; Boss; Big 440; HydraPro III; Commander 181-556 Fluid Pump Assembly; Admiral 185-551 Fluid Pump Assembly. Verify fit using the correct parts diagram for your exact model and serial number. |
| Related Parts Commonly Serviced Together | Upper packings, displacement rod (185-984), pump block (181-906), O-rings, packing sets, and lower packing assembly. Always inspect the packing spring when servicing packings and replace if fatigued or broken. |
| Common Problems Solved | Loss of tension, visible fatigue or cracking, broken spring, fluid leakage past the rod, loss of pressure, and contamination of the drive system with paint or solvent. |
| Signs Replacement Is Needed | Spring feels weak or does not provide adequate force. Spring shows cracks, corrosion, or deformation. Spring is fractured or broken into pieces. Always replace the spring whenever packings are replaced. |
| Installation & Maintenance | When servicing pump packings, always inspect the packing spring for signs of fatigue, loss of tension, or breakage. Replace the spring whenever packings are replaced to ensure optimal sealing performance. Never reuse an old spring with new packings. During reassembly, insert the upper spring into the pump block before installing the upper packings. |
| Commercial Benefits | Restores proper packing tension, prevents leaks, extends the life of both packings and piston rod, and maintains reliable pump operation. |
The 182-906 Upper Packing Spring is a critical wear component in the fluid sections of Admiral, Commander, Hydra M, Hydra Pro Super, PowrCoat, and Big 440 sprayers. Over time, packing springs can fatigue, lose tension, or break due to millions of compression cycles. A weakened or broken spring can allow packings to relax, leading to fluid leakage past the rod, loss of pressure, and contamination of the drive system. When servicing pump packings, always inspect the packing spring for signs of fatigue, loss of tension, or breakage. Replace the spring whenever packings are replaced to ensure optimal sealing performance. Never reuse an old spring with new packings. During reassembly, insert the upper spring into the pump block before installing the upper packings. Use genuine Titan components to ensure proper fit, correct material specifications, and reliable long-term operation. For related Titan air-powered sprayer components, see the Titan Air Powered Airless Sprayer Parts and Air Powered Airless Sprayer Parts collection.
Frequently Asked Questions
Quick contractor-focused answers for confirming fitment, function, and service value.
No reviews yet. Be the first to review this product!