Titan part 14072 is an O‑ring used as a sealing component in the fluid system of compatible SprayTech airless sprayers. This O‑ring prevents leaks between mating parts, ensuring proper pressure retention and contaminant exclusion. Replacing a worn, cracked, or flattened O‑ring restores leak‑free operation and system integrity.
| Part Number | 14072 |
|---|---|
| Part Description | O-Ring |
| Brand | Titan |
| Fits |
|
| Condition | New |
The Titan 14072 O-Ring is a precision‑molded elastomeric seal used in critical fluid passages of compatible SprayTech airless sprayers. It creates a leak‑tight barrier between mating components such as fittings, housings, and valve assemblies.
Over time, O‑rings can become hard, brittle, flattened, or cracked due to chemical exposure, heat, and pressure cycles. A failed O‑ring can cause external leaks, air ingestion (loss of prime), or pressure loss. Replacing the O‑ring with 14072 restores a reliable seal and prevents fluid bypass.
| Function | Description |
|---|---|
| Fluid sealing | Prevents paint leakage at connections and joints |
| Pressure retention | Maintains system pressure by eliminating bypass |
| Contaminant exclusion | Keeps dirt and debris out of the fluid path |
| Symptom | Indication |
|---|---|
| Visible damage | Cracks, flattening, swelling, or hardness |
| External leakage | Paint seeps from a fitting or joint |
| Air ingestion | Loss of prime or bubbles in fluid |
| Pressure drop | Sprayer cannot build or hold pressure |
Titan part 14072 is compatible with the following SprayTech models. Always verify fitment using the correct parts diagram for your exact revision.
| Brand / Model | Component |
|---|---|
| SprayTech LCX 750 | O-Ring |
| SprayTech LC1600 | O-Ring |
| SprayTech GPX1600 | O-Ring |
| SprayTech GPX1250 | O-Ring |
| SprayTech GPX750 | O-Ring |
| SprayTech Airless EPX2555 | O-Ring |
| SprayTech Airless EPX2505 | O-Ring |
| SprayTech Airless EPX2455 | O-Ring |
| SprayTech Airless EPX2405 | O-Ring |
| SprayTech Airless EPX2305 | O-Ring |
| SprayTech Airless EP2510 | O-Ring |
| SprayTech Airless EP2400 | O-Ring |
| SprayTech Airless EP2300 | O-Ring |
| SprayTech Airless EP2300 SE | O-Ring |
| SprayTech Airless EP2205 | O-Ring |
| SprayTech Airless EP2105 | O-Ring |
When replacing an O‑ring, inspect these related components for wear or damage.
Inspect the groove or sealing surface for nicks, corrosion, or debris that could damage the new O‑ring.
If one O‑ring has failed, others in the same fluid circuit may be near failure – consider replacing all accessible seals.
Debris that caused O‑ring damage may also clog the filter – inspect and clean or replace.
Copyright © 2024 AlltitanParts.com - All Rights Reserved.
