Titan 14069 Filter 50 Mesh
OEM SprayTech Filtration Component
Titan 14069 Filter 50 Mesh is a genuine replacement filter screen for compatible SprayTech airless sprayers. The 50 mesh rating (coarser than 100 mesh) traps larger debris while allowing higher flow rates for thick coatings such as block filler, elastomeric, and high-build primers.
Compatibility
Inspect the filter before each use or when switching materials. Replace immediately if the screen is damaged, deformed, or if the housing seal leaks. For heavy coatings, clean the filter frequently to prevent pressure drop.
SprayTech Fluid Filtration Replacement
Titan 14069 Filter 50 Mesh for SprayTech Airless Sprayers
Titan 14069 is a 50 mesh replacement filter designed to capture larger particles, debris, and dried paint skins before they enter the spray tip. With a coarser rating (approximately 300 micron opening) compared to standard 100 mesh filters, this filter allows higher flow rates necessary for thicker coatings such as block filler, elastomeric, high-build primers, and textured materials. The official Titan EP2300 manual lists 14069 as the "Filter Sieve (50 Mesh)" in the dump valve assembly, confirming its role alongside the 0294194 filter body. A clogged, torn, or missing filter can cause uneven spray, pressure fluctuations, or premature tip wear.
| Detail | Technical / Commercial Information |
|---|---|
| Product Overview | Genuine OEM 50 mesh filter element. Confirmed in the official Titan EP2300 manual as the "Filter Sieve (50 Mesh)" . |
| Specifications | Mesh: 50 (approximately 300 micron). Construction: Metal screen with solid endcap. Function: Coarse debris filtration, high flow rate for thick coatings, pump and tip protection. |
| Compatible Models | SprayTech EP2105, EP2205, EP2300, EP2300se, EP2400, EP2510; EPX2305, EPX2405, EPX2455, EPX2505, EPX2555; LC750, LC1250, LC1600; GPX750, GPX1250, GPX1600. Also listed for Wagner/Sherwin-Williams SW623 (EP-style) and GP 2905. Always verify fitment using the correct parts diagram. |
| OEM Part Number | 14069 Filter, 50 Mesh. |
| Replacement Indicators | Clogged screen (reduced flow, pulsation, inability to maintain pressure); visible damage (tears, holes, stretched mesh, deformed housing); seal leaks (fluid bypassing the filter); material change (switching from coarse to fine coating may require different mesh). |
| Related Parts Commonly Serviced Together | Filter body assembly (0294194); spray tip and tip guard; suction set and hose strainer; pump seals and piston packing. |
| Why Genuine OEM | Correct mesh rating and dimensions ensure proper fit and filtration. The 50 mesh is specifically suited for thick coatings; using the wrong mesh can cause pressure drop or allow debris to reach the tip. Metal construction resists solvents and cleaning chemicals. |
Service guidance: Inspect the filter before each use or when switching materials. Replace immediately if the screen is damaged, deformed, or if the housing seal leaks. For heavy coatings, clean the filter frequently to prevent pressure drop. The screen can be rinsed with compatible solvent if only lightly soiled, but replace if the mesh is torn, stretched, or the housing seal is damaged. Always verify that 50 mesh is appropriate for your coating; finer materials may require 100 mesh. Always relieve system pressure and disconnect power before servicing.
Frequently Asked Questions
Quick answers for confirming fitment and identifying when replacement is needed.
No reviews yet. Be the first to review this product!
