Titan 140-009 O-Ring

Titan Fluid Pump Seal Replacement Component

Titan 140-009 O-Ring for Commander, PowrTwin and PowrBeast Sprayers

Titan 140-009 is an OEM O-ring that serves as a critical sealing component in the fluid pump assembly of compatible Titan and Speeflo sprayers. This O-ring installs in the pump cylinder groove, where it seals the cylinder area to prevent coating material from leaking past the cylinder and to maintain proper pressure during pump operation. Official Titan parts diagrams list the 140-009 as a lower cylinder seal, outer, in the fluid section of models including the PowrTwin 8900 and PowrTwin 6900 GHD. It is also used in the Commander Air Powered Airless Sprayer fluid pump assembly and the PowrCoat 975 fluid pump assembly. Over time, O-rings can become compressed, flattened, hardened, or damaged from chemical exposure and pressure cycling. A worn or damaged O-ring can cause fluid leakage, poor cylinder sealing, pressure loss, and incomplete pump rebuilds. The 140-009 is verified as compatible with an extensive range of models, including the Commander, PowrCoat 975, PowrBeast 9700, PowrTwin 5500, 6900GHD, and 8900, as well as PowrLiner models. It is commonly serviced alongside the cylinder (140-922), gasket (138-029), upper packing set (138-053), lower packing set (138-154), and other fluid section components during a complete pump rebuild. Always replace O-rings during pump service and lubricate them before installation to prevent cutting or pinching. Always verify fitment against your specific model's parts diagram before ordering.

When installing the 140-009 O-Ring, always replace it during fluid pump service. Lubricate the O-ring before installation to prevent cutting or pinching during assembly. Inspect the cylinder groove for damage or debris that could compromise the seal. Always verify fitment against your specific model's parts diagram before ordering.