Part number 138471 is a grommet push-in with a 3/8-inch inner diameter and a 5/8-inch outer diameter. This rubber or elastomeric grommet is designed to protect hoses, cables, or wiring that pass through panels or frames. It is compatible with Helix FR and Helix VR equipment. The grommet provides a snug, protective seal that prevents abrasion, reduces vibration, and keeps out debris.
| Part Number | 138471 |
|---|---|
| Part Description | Grommet Push-in 3/8ID X 5/8 |
| Compatible With | Helix FR; Helix VR |
| Condition | New |
Part number 138471 is a push-in grommet with a 3/8-inch inner diameter and a 5/8-inch outer diameter. This small but essential component is used to line holes in metal, plastic, or composite panels, creating a smooth, protected passage for hoses, cables, or other lines.
This grommet is compatible with Helix FR and Helix VR equipment models. A missing, cracked, or deteriorated grommet can lead to wire chafing, hose abrasion, fluid leaks, or the ingress of dirt and moisture. Replacing it protects vital components and maintains the integrity of the equipment's routing paths.
| Abrasion Protection | Cushions hoses or wires from sharp panel edges. |
|---|---|
| Sealing | Helps seal openings against dust, debris, and moisture. |
| Strain Relief | Reduces stress on connections by limiting movement. |
| Vibration Dampening | Absorbs minor vibrations from lines passing through the panel. |
| Visible Damage | Cracks, tears, crumbling, or hardening of the material. |
|---|---|
| Missing | Grommet is absent, leaving the panel hole exposed. |
| Poor Fit | Grommet is loose in the hole or around the hose/cable. |
| During Hose/Wire Service | Whenever a line is replaced or rerouted through the panel. |
Grommet part 138471 is designed for use on the following Helix series equipment. Verify the specific application location using the appropriate parts diagram.
| Compatible Equipment Models | Component |
|---|---|
| Helix FR | Push-In Grommet (3/8ID X 5/8) |
| Helix VR | Push-In Grommet (3/8ID X 5/8) |
When servicing routing and protection components, these items are often addressed in the same service interval.
Used to secure the hose or cable near the grommet to prevent pull-out.
The line passing through the grommet; inspect for wear at the point of contact.
The component with the mounting hole; check for corrosion or damage around the edge.
Copyright © 2024 AlltitanParts.com - All Rights Reserved.
