Titan 138-029 Copper Gasket
OEM Titan Seal Component
Titan 138-029 Copper Gasket is an OEM soft-metal sealing ring used at fluid pump joints on the PowrCoat 975 fluid pump assembly, preventing leaks under high pressure by compressing between mating surfaces.
Compatibility Table
OEM copper gasket restores leak-free sealing at pump joints, maintains system pressure, and prevents fluid loss.
Titan Fluid Pump Seal Component
Titan 138-029 Copper Gasket for Fluid Pump Sealing
Titan 138-029 is an OEM copper gasket used in the fluid pump assembly of compatible Titan spray systems, including the PowrCoat 975. This sealing component provides a reliable, pressure-tight seal at pump joints, preventing fluid leaks and maintaining proper system pressure for consistent spray performance.
| Detail | Technical / Commercial Information |
|---|---|
| Product Overview | OEM Titan copper gasket used in the fluid pump assembly of compatible spray systems, including the PowrCoat 975. |
| Function | Provides a pressure-tight seal at fluid pump joints where metal components mate. The copper material conforms to surface imperfections under compression, creating a reliable seal against fluid leaks. Helps maintain system pressure and prevents material loss at connection points. |
| Industrial Applications | Professional sprayer repair, fluid pump maintenance, seal replacement, and rental fleet equipment servicing. |
| Compatible Titan Models | PowrCoat 975 fluid pump assembly (0533908). Also referenced as a related part for the 140-922 Pump Cylinder. |
| OEM Part Number | 138-029 Copper Gasket. Alternate part number 0138-029. |
| Related Parts Commonly Serviced Together | O-ring 140-009, pump cylinder 140-922, upper packing set 138-053A, lower packing set, displacement rod 138-917, valve balls, valve seats. |
| Common Problems Solved | Fluid leaks at pump joints, pressure loss, and material seepage at connection points. Small leaks at pump joints are often mistaken for packing failure and can be resolved by replacing the copper gasket and O-ring. |
| When Replacement Is Recommended | Replace whenever the fluid pump is disassembled for service. Also replace if fluid leaks are observed at pump joints, if the gasket shows signs of deformation, cracking, or corrosion, or if pressure cannot be maintained due to seal failure. |
| Service Guidance | Inspect the copper gasket and O-ring (140-009) together when troubleshooting leaks at pump joints. Clean mating surfaces before installation. Tighten connections to specification to ensure proper gasket compression. Replace gaskets whenever the pump is serviced. |
| OEM & Brand Information | Genuine Titan OEM component designed for correct fitment in compatible spray systems. |
| Commercial Benefits | Restores proper sealing at pump joints, prevents fluid leaks, maintains system pressure, and ensures consistent spray performance. |
The 138-029 Copper Gasket is a small but essential sealing component in the fluid pump assembly. Copper gaskets are used at pump joints where a durable, pressure-tight seal is required. Over time, exposure to pressure cycling, chemicals, and repeated assembly can cause the gasket to lose its sealing ability. Small fluid leaks at pump joints are often misdiagnosed as packing failure when the actual cause is a worn copper gasket or O-ring. When servicing the fluid pump, always replace the copper gasket and inspect the O-ring (140-009) at the same time. This genuine OEM gasket restores proper sealing and ensures reliable pump operation.
Frequently Asked Questions
Quick contractor-focused answers for confirming fitment, function, and service value.
No reviews yet. Be the first to review this product!
