Titan part 112-202 is a nipple, 1/2" tall thread used as a threaded fitting in the fluid system of compatible Commander airless sprayers. This short nipple typically connects two components, such as a valve to a manifold or a hose swivel to a pump outlet. A cracked, stripped, or corroded nipple can cause fluid leaks, pressure loss, or system failure. Replacing with the OEM nipple restores proper fluid routing and leak‑free connections.
| Part Number | 112-202 |
|---|---|
| Part Description | Nipple, 1/2" Tall Thread |
| Brand | Titan |
| Fits |
Commander (Model No 741-440, 761-301, 761-411, 741-331) |
| Condition | New |
The Titan 112-202 Nipple is a genuine OEM replacement fitting with a 1/2‑inch tall thread (typically NPT or straight thread) used in the fluid circuit of Commander series airless sprayers. It is commonly employed to connect valves, manifolds, pressure transducers, or hoses where a short, rigid male‑to‑male adapter is required.
Over time, nipples can become cracked from over‑tightening, stripped from cross‑threading, or corroded from chemical exposure. A damaged nipple causes external leaks, pressure drop, or air ingestion into the fluid system. Replacing with OEM Titan 112-202 ensures correct thread fit, material strength, and leak‑free operation.
| Connects fluid components | Provides rigid male‑to‑male thread adapter |
|---|---|
| Maintains alignment | Keeps connected parts at correct spacing |
| Supports pressure | Withstands operating pressure without leaking |
| Chemical resistance | Compatible with paints and solvents |
| Visible cracks | Cracks in the nipple body |
|---|---|
| Stripped threads | Threads damaged, causing poor seal |
| Corrosion / pitting | Heavy rust that weakens the fitting |
| Persistent leak | Leak at threads even after fresh sealant |
Titan part 112-202 is a direct OEM replacement nipple for the following Commander models. Always verify with your machine's parts diagram.
| Model | Component |
|---|---|
| Commander (741-440) | Nipple, 1/2" tall thread |
| Commander (761-301) | Nipple, 1/2" tall thread |
| Commander (761-411) | Nipple, 1/2" tall thread |
| Commander (741-331) | Nipple, 1/2" tall thread |
When replacing a nipple, inspect these associated components.
Inspect threads for damage or corrosion.
Always use fresh sealant on new nipple threads.
Use a backup wrench to avoid twisting connected components.
Copyright © 2024 AlltitanParts.com - All Rights Reserved.
