Please wait while we process your order...

Titan 107-946 Pump Cylinder

$191.92
$222.90
Save 14%
Available to Order
Part #: 107-946

OEM Titan Replacement Components

Titan 107-946 Pump Cylinder is an OEM fluid section cylinder for compatible PowrTwin and PowrLiner sprayers, while Titan 662-411 Reversible Tip is a genuine SC-6+ spray nozzle with a 0.011 inch orifice for fine finish applications.

Brand: Titan Part #: 107-946 Part #: 662-411 Category: OEM Replacement

Compatibility Overview

Part Number Description Compatible Platform Function
107-946 Pump Cylinder PowrTwin, PowrLiner, PowrBeast Fluid section cylinder housing
662-411 Reversible Tip Titan SC-6+ spray guns Spray pattern and atomization

A worn pump cylinder causes scoring, packing damage, and pressure loss. The 107-946 restores proper bore geometry. The 662-411 reversible tip extends tip life, provides consistent film thickness, and fits all Titan and most industry spray gun guards.

Quantity
Buy Now
Genuine OEM Part Fast Shipping Easy Returns

Titan OEM Component Replacement

Titan 107-946 Pump Cylinder and 662-411 Reversible Tip

Titan 107-946 is an OEM stainless steel pump cylinder that supersedes the older 107-936 part number. It is the central structural component of the fluid section, housing the piston, upper and lower packings, and piston rod. During reassembly, Titan instructions specify applying blue Loctite to the bottom threads, lubricating the upper threads with anti-seize compound, and threading the cylinder into the pump housing or gear box until the jam nut is flush. The cylinder must be positioned so the nipple faces the back of the unit before the jam nut is tightened. A worn, scored, or damaged cylinder bore prevents proper packing seal contact, causing pressure loss, fluid bypass, and erratic pump performance.

Titan 662-411 is a genuine Titan SC-6 series reversible spray tip with a 0.011-inch orifice and an 8-inch fan width. This tip is compatible with Titan SC-6 and Graco RAC 5 equipment. Worn spray tips adversely affect the spray pattern, resulting in reduced production, poor finish, and wasted material. The reversible design allows quick clearing of clogs by rotating the tip handle 180 degrees. This tip is suitable for a range of materials including exterior paint, primer, polyurethane, lacquer, stain, sealer, and interior paint.

OEM: Titan Part #: 107-946 Part #: 662-411 Category: OEM Replacement
Detail Technical / Commercial Information
107-946 Overview OEM Titan stainless steel pump cylinder that supersedes 107-936, serving as the central housing for the piston and packings in the fluid section.
107-946 Function Provides the precision bore surface for piston reciprocation and packing seal contact. Threads into the pump housing or gear box and is secured by a jam nut.
107-946 Compatible Models PowrTwin 3500-DC, PowrTwin 4900 Plus (Gas); PowrLiner 4000, 4955; PowrBeast 4700T/4700. Verify your exact model against the service manual.
107-946 Replacement Indicators Visible scoring, wear, or corrosion on the cylinder bore; persistent packing leakage after repacking; pressure loss not resolved by other service; or during any fluid section rebuild.
662-411 Overview Genuine Titan SC-6 series reversible spray tip with 0.011-inch orifice and 8-inch fan width.
662-411 Specifications Orifice: 0.011 in; Fan Width: 8 in; Series: SC-6; Compatible with Titan SC-6 and Graco RAC 5 equipment.
662-411 Compatible Materials Exterior paint, primer, polyurethane, lacquer, stain, sealer, and interior paint.
662-411 Replacement Indicators Worn tip adversely affecting spray pattern, reduced production, poor finish quality, or wasted material. Replace worn tips immediately.
OEM Part Numbers 107-946 Pump Cylinder (supersedes 107-936); 662-411 Reversible Tip.
Installation Notes 107-946: Apply blue Loctite to bottom threads, anti-seize to top threads, thread into housing until jam nut is flush, position nipple toward back of unit, tighten jam nut. 662-411: Rotate handle 180 degrees to clear clogs; replace when pattern deteriorates.

The 107-946 Pump Cylinder is a critical structural component in the fluid section. Inspect the bore for scoring during any pump rebuild and replace if damaged. The 662-411 Reversible Tip is a consumable wear item. Replace immediately when the spray pattern deteriorates or finish quality declines. Verify model compatibility against your Titan service manual, as configurations vary across sprayer platforms.

Frequently Asked Questions

Contractor-focused answers for confirming fitment and service value.

Common Questions
What is the Titan 107-946 Pump Cylinder used for?

It is the central structural component of the fluid section, housing the piston and packings and providing the precision bore surface for pump operation.

Which Titan sprayers use part 107-946?

It is compatible with PowrTwin 3500-DC, PowrTwin 4900 Plus, PowrLiner 4000, PowrLiner 4955, and PowrBeast 4700T/4700. Always verify your exact model against the service manual.

What is the Titan 662-411 Reversible Tip used for?

It is a genuine SC-6 series spray tip with a 0.011-inch orifice and 8-inch fan width for consistent atomization and finish quality on compatible spray guns.

When should each part be replaced?

Replace the pump cylinder when the bore is scored or damaged during rebuild. Replace the spray tip immediately when the pattern deteriorates or finish quality declines.

Are these genuine OEM Titan parts?

Yes, both are OEM Titan replacement components designed for correct fitment and reliable performance.

No reviews yet. Be the first to review this product!

Recently Viewed

Genuine OEM
Titan
Titan 9910712 Nut groove
Part #: 9910712
$6.20
Buy Now
Titan 0290383 Handle bar clamp Kit pkgd −16%
Titan
Titan 0290383 Handle bar clamp Kit pkgd
Part #: 0290383
$596.40 $710.00 Save $113.60
Buy Now

Added to cart

Your Cart
No items in cart.
Add more items
Total 0
Checkout Modify Cart