Powr part 107-060 is a seal washer used in the pump assembly of compatible PowrTwin, PowrLiner, and PowrBeast sprayers. This washer provides a critical sealing surface between components, preventing fluid leaks and maintaining proper pressure. Replacing a worn, cracked, or deformed seal washer restores leak‑free operation, eliminates pressure loss, and ensures reliable pump performance.
| Part Number | 107-060 |
|---|---|
| Part Description | Seal Washer |
| Brand | Powr |
| Fits | PowrTwin 4900 XLT, 4900, 6900, 8900, 12000 Plus; PowrLiner 6950, 4950, 4955, 6955, 8955; PowrBeast 4700, 7700, 9700 |
| Condition | New |
The Powr 107-060 Seal Washer is a precision‑formed washer used in the pump assembly of many PowrTwin, PowrLiner, and PowrBeast sprayers. It creates a reliable seal between two mating surfaces – typically between the fluid section and the crankcase or within the valve stack. This washer prevents fluid leaks, maintains internal pressure, and protects against contamination.
Over time, seal washers can become compressed, cracked, or brittle due to heat, chemical exposure, or normal wear. A failed washer allows fluid to escape, leading to external leaks, loss of pressure, and potential damage to surrounding components. Replacing the seal washer restores leak‑free operation, ensures consistent pressure, and prevents costly damage from fluid ingress.
| Fluid sealing | Prevents leakage between pump sections or at valve interfaces |
|---|---|
| Pressure containment | Helps maintain internal pressure by creating a leak‑tight barrier |
| Contamination prevention | Blocks entry of debris or moisture into critical areas |
| Visible cracks / compression set | Washer is flattened, cracked, or no longer resilient |
|---|---|
| External leakage | Fluid seeping from between pump sections |
| During pump overhaul | Always replace seal washers when rebuilding the pump |
| After chemical exposure | Replace if washer shows signs of chemical attack |
Powr part 107-060 is used on the following models. Always confirm with your machine's parts diagram.
| Model | Component |
|---|---|
| PowrTwin 4900 XLT | Seal Washer |
| PowrTwin 4900 | Seal Washer |
| PowrTwin 6900 | Seal Washer |
| PowrTwin 8900 | Seal Washer |
| PowrTwin 12000 Plus | Seal Washer |
| PowrLiner 6950 | Seal Washer |
| PowrLiner 4950 | Seal Washer |
| PowrLiner 4955 | Seal Washer |
| PowrLiner 6955 | Seal Washer |
| PowrLiner 8955 | Seal Washer |
| PowrBeast 4700 | Seal Washer |
| PowrBeast 7700 | Seal Washer |
| PowrBeast 9700 | Seal Washer |
When replacing the seal washer, consider these associated components.
Replace all o‑rings in the same assembly to ensure complete sealing.
If the washer seals a major joint, replace the corresponding gasket as well.
Inspect the mating surfaces for damage that could cause the new washer to fail.
Copyright © 2024 AlltitanParts.com - All Rights Reserved.
