Titan 106-015 O-Ring PTFE
OEM Titan PTFE Seal
Titan 106-015 O-Ring PTFE is an OEM polytetrafluoroethylene seal engineered for high-performance sealing in critical fluid passages of compatible PowrBeast, PowrLiner, and PowrTwin sprayer models, offering exceptional chemical resistance and low friction.
Compatibility Overview
PTFE construction resists chemical attack from solvents, coatings, and aggressive fluids while maintaining low friction and reliable sealing under pressure. Replacing a worn, deformed, or damaged PTFE O-ring prevents fluid leaks and maintains consistent system pressure.
Titan PTFE Seal Replacement
Titan 106-015 O-Ring PTFE for Fluid Section Service
Titan 106-015 is an OEM PTFE O-ring engineered for high-performance sealing in critical fluid passages of compatible PowrBeast, PowrLiner, and PowrTwin sprayer models. Manufactured from polytetrafluoroethylene, this O-ring offers exceptional chemical resistance, low friction, and the ability to withstand a wide range of temperatures and solvents commonly used in professional coating applications. Documented as item "O-ring, PTFE (2)" in the official PowrLiner PL4955 parts breakdown, it is a critical sealing component in the fluid section. When the original PTFE O-ring becomes worn, deformed, or damaged, fluid leaks and pressure loss occur. This replacement ensures reliable sealing, prevents fluid leakage, and maintains consistent system pressure.
| Detail | Technical / Commercial Information |
|---|---|
| Product Overview | OEM Titan PTFE O-ring engineered for high-performance sealing in critical fluid passages of compatible professional sprayers. |
| Function | Seals fluid passages between pump sections, manifolds, and valves; maintains system pressure; prevents contamination and fluid leakage. |
| Material Properties | PTFE (polytetrafluoroethylene) offers exceptional chemical resistance, low friction, and the ability to withstand a wide range of temperatures and solvents. |
| System Location | Fluid section. Listed as item "O-ring, PTFE (2)" in the official PowrLiner PL4955 parts breakdown. |
| Industrial Applications | Fluid section repair, pump rebuild, preventive maintenance on high-pressure airless sprayers, and fleet equipment restoration. |
| Documented Compatible Models | PowrBeast 4700, 7700, 9700; PowrLiner 4000, 4900 XLT, 4950, 4900, 5000, 6950, 4955, 6955, 8955; PowrTwin 4900, 6900, 8900, 12000 Plus, 3500 50th Anniversary, 3500, 4500, 4900 GH, 4900 XLT. Verify your exact model and revision against the service manual before ordering. |
| OEM Part Number | 106-015 O-Ring, PTFE. Alternate number 0106-015. |
| Common Problems Solved | Fluid leakage from pump housing or manifold joints, pressure instability or pulsation, visible O-ring wear (cracks, nicks, flat spots, swelling), and erratic spray patterns. |
| Replacement Indicators | Visible wear or damage to the O-ring, external fluid leaks, pressure instability, or during any pump rebuild or fluid section service. |
| Related Parts Commonly Serviced Together | Packing sets, valve seats, valve balls, and other fluid section seals. Inspect all sealing components during service. |
| Installation Notes | Lubricate the O-ring with oil or grease before installation to prevent damage. Ensure the O-ring seats properly in its groove. Follow the Pressure Relief Procedure before servicing. Inspect the sealing area for debris before reassembly. |
The 106-015 O-Ring PTFE is a critical sealing component in the fluid section of professional Titan sprayers. If you notice fluid weeping from the pump housing, a drop in pressure, or irregular spray patterns, inspect the PTFE O-rings in the affected area. Replace them as part of routine pump rebuilds or whenever the fluid section is opened. Always lubricate the new O-ring before installation and verify model compatibility against your Titan service manual.
Frequently Asked Questions
Contractor-focused answers for confirming fitment and service value.
No reviews yet. Be the first to review this product!