Titan 106-014 O-Ring
OEM Titan Sealing Component
Titan 106-014 O-Ring is an OEM synthetic rubber seal used in the pump, manifold, and valve assemblies of compatible PowrBeast, PowrLiner, and PowrTwin sprayer models, preventing fluid leakage and maintaining consistent system pressure.
Compatibility Overview
Prevents fluid leakage between pump sections, manifolds, and valves while maintaining required operating pressure. A worn, hardened, or cracked O-ring causes pressure loss, erratic spray patterns, and potential fluid hazards. OEM replacement restores reliable sealing.
Titan O-Ring Replacement
Titan 106-014 O-Ring for Pump and Fluid Section Service
Titan 106-014 is an OEM synthetic rubber O-ring used throughout Titan's professional sprayer line to prevent fluid leakage in pumps, valves, and fluid passages. Manufactured to exact material and dimensional specifications, it provides a reliable seal under the pressures and chemical exposure typical in airless spraying applications. The O-ring is referenced in PowrTwin Jr repair quick-reference documentation as the lower cylinder seal O-ring. Over time, O-rings can harden, swell, crack, or take a permanent set, leading to leaks, pressure loss, or system failure. A worn O-ring in the pump section causes erratic operation, while a failed seal in the fluid manifold can create a hazardous spray of coating material. Replacing suspect O-rings with genuine Titan parts ensures consistent performance and extends equipment life.
| Detail | Technical / Commercial Information |
|---|---|
| Product Overview | OEM Titan synthetic rubber O-ring used to prevent fluid leakage in pump sections, manifolds, and valve assemblies of compatible sprayers. |
| Function | Seals fluid passages between pump sections, manifolds, and valves; maintains system operating pressure; prevents contamination and fluid escape. |
| System Location | Pump fluid section, manifold, and valve assemblies. Referenced as lower cylinder seal O-ring in PowrTwin Jr documentation. |
| Documented Compatible Models | PowrBeast 4700, 7700, 9700; PowrLiner 4000, 4900 XLT, 4950, 4900, 5000, 6950, 4955, 6955, 8955; PowrTwin 4900, 6900, 8900, 12000 Plus, 3500 50th Anniversary, 3500, 4500, 4900 GH, 4900 XLT. Verify your exact model and revision against the service manual before ordering. |
| OEM Part Number | 106-014 O-Ring, Synthetic Rubber. Alternate number 0106-014. |
| Common Problems Solved | Fluid weeping from pump housing, pressure drop, irregular spray patterns, and hazardous fluid leaks at manifold or valve joints. |
| Replacement Indicators | Visible cracks, nicks, flat spots, or swelling; external fluid leaks; pressure instability or pulsation; or during any pump rebuild. |
| Related Parts Commonly Serviced Together | Piston/cylinder seals, valve seat and ball, manifold gaskets, and other O-rings within the fluid section. Replace all seals together during pump rebuild. |
| Installation Notes | Lubricate the O-ring before installation. Inspect grooves for nicks or corrosion. Replace O-rings as standard practice whenever the fluid section is opened. |
The 106-014 O-Ring is a critical sealing component in the pump and fluid section. If you notice fluid weeping from the pump housing, a drop in pressure, or irregular spray pattern, inspect the O-rings in the affected area. Replace the 106-014 O-ring as part of routine pump rebuilds or whenever the fluid section is opened. Verify model compatibility against your Titan service manual, as seal configurations vary across sprayer platforms.
Frequently Asked Questions
Contractor-focused answers for confirming fitment and service value.
No reviews yet. Be the first to review this product!
