Titan 103-585 Long Bent Siphon Tube (can be ordered as Titan 2437710)

Titan Siphon System Replacement Component

Titan 103-585 Long Bent Siphon Tube for Admiral, Commander and Hydra M Sprayers

Titan 103-585 is an OEM long bent siphon tube that serves as the material intake conduit on compatible Admiral, Commander, and Hydra M sprayer systems. This 1 inch by 36 inch bent tube is designed to reach the bottom of coating containers, ensuring consistent material pickup and reducing waste as the container empties. The bent configuration allows the tube to navigate around container edges and follow the fluid level down to the last usable ounce. Siphon tubes are the first component in the material delivery path and are subject to clogging from dried paint, debris, and settled pigments. A restricted or blocked siphon tube can cause symptoms including poor priming, weak material pickup, sputtering, and loss of spray pressure. Air leaks at the siphon tube connection are another common cause of priming failure, which is why proper sealing with PTFE tape during installation is critical. The 103-585 is verified as compatible with the Admiral, Commander, and Hydra M 2000 models. It is commonly serviced alongside the siphon hose, hose clamp, and rock catcher assembly. This part can be ordered as Titan 2437710. During maintenance, remove and clean the siphon tube regularly, inspect for cracks or damage, and ensure the threaded connection is properly sealed. Always verify fitment against your specific model's parts diagram before ordering.

When installing the 103-585 Bent Siphon Tube, wrap the threads on the down tube with PTFE tape before assembly to prevent air leaks. Thread the siphon tube into the inlet valve and tighten securely. Remove and clean the tube regularly to prevent clogging from dried material. Inspect for cracks or damage and replace if necessary. Always verify fitment against your specific model's parts diagram before ordering.