Titan 0558676 Inlet Ball Cage
OEM Titan Inlet Valve Component
Titan 0558676 Inlet Ball Cage is a genuine OEM component for the Impact 1640 fluid section. This 3/4-inch cage guides and retains the inlet valve ball during pump operation, supporting controlled fluid intake and reliable check-valve function.
Compatibility
The inlet valve ball (0555595) is listed separately and is not included with this cage. Inspect the ball and seat for wear during service. Confirm the installed fluid-section revision before ordering.
Titan Inlet Valve Repair Component
Titan 0558676 Inlet Ball Cage for Impact 1640
Titan 0558676 is a genuine OEM inlet ball cage cataloged for the Impact 1640 fluid section and identified as a 3/4-inch component. Its purpose is to guide and retain the inlet valve ball within the designated valve arrangement, supporting controlled fluid intake and dependable pump maintenance. The official Impact 1640 manual describes the fluid section repacking procedure, which includes removing the inlet valve cage, inlet valve ball, inlet valve seat, and o-ring from the inlet valve. The part is also listed as a lower ball guide for the Titan Performance Series 1650e and Wagner ProSpray 3.39 platforms, confirming its use across related pump designs.
| Detail | Technical / Commercial Information |
|---|---|
| Product Overview | Genuine OEM inlet ball cage (3/4-inch) cataloged for the Impact 1640 fluid section. The official Impact 1640 manual describes removing the inlet valve cage during fluid section repacking. Also listed as a lower ball guide for the Titan Performance Series 1650e and Wagner ProSpray 3.39. |
| Function | Ball guidance (defines the operating space for the inlet valve ball); retention (keeps the ball within the intended valve arrangement); supports one-way flow control for controlled fluid intake. |
| Compatible Models | Titan Impact 1640; Titan Performance Series 1650e; Wagner ProSpray 3.39. Always confirm the installed fluid-section revision and exact cage part number before purchasing. |
| OEM Part Number | 0558676 Inlet Ball Cage, 3/4-inch. |
| Replacement Indicators | Restricted ball movement (debris or deformation within the cage); difficulty priming; pressure fluctuation; visible mechanical damage (cracks, distortion, excessive wear); contamination. |
| Related Parts Commonly Serviced Together | Inlet valve ball (0555595) (listed separately); inlet valve seat; o-ring; inlet valve housing. |
| Why Genuine OEM | Correct internal geometry ensures the inlet valve ball moves as intended within the check-valve arrangement. A cage that appears similar but has different dimensions can interfere with ball movement and valve function. |
Service guidance: Confirm the machine model, fluid-section revision, and inlet valve arrangement before ordering. Relieve system pressure and disconnect power before servicing. Disassemble the inlet valve per the manufacturer's instructions, keeping the ball, seat, cage, seals, and associated components organized. Inspect the inlet valve ball and seat for wear, pitting, and contamination. Install parts in the prescribed sequence and orientation. After reassembly, complete priming and operational checks and inspect for leaks. Never open a pressurized fluid section or attempt to stop a high-pressure leak with your hand.
Frequently Asked Questions
Quick answers for confirming fitment and identifying when replacement is needed.
No reviews yet. Be the first to review this product!
