Please wait while we process your order...

Product successfully added to your cart.
Placeholder Image

Quantity in Cart: 1


Continue Shopping Shopping Cart
Item removed from Cart
X
 
×
Titan 0551538 Upper Packing (This is an aftermarket part from BEDFORD)

Titan 0551538 Upper Packing (This is an aftermarket part from BEDFORD)

Sourced From:
Titan Tools Inc.

 

0551538 is an aftermarket upper packing manufactured by BEDFORD, used to seal the piston rod in the pump fluid section of compatible RentSpray and SprayTech airless sprayers. It replaces the OEM upper packing to restore pressure, prevent fluid bypass, and extend pump life.

Part Number 0551538
Part Description Upper Packing
Brand RentSpray / SprayTech
Fits RentSpray 400; SprayTech Advantage EPX2155, EPX2255
Condition New

$25.12

 

Upper Packing (Aftermarket) for RentSpray & SprayTech Airless Sprayers

The 0551538 Upper Packing is a high‑quality aftermarket replacement seal manufactured by BEDFORD. It is designed to replace the OEM upper packing in the pump fluid section of RentSpray 400 and SprayTech Advantage EPX2155 / EPX2255 airless sprayers. The upper packing seals the piston rod on the pressure (outlet) side of the pump, preventing paint from bypassing the piston and ensuring full operating pressure.

Over time, the upper packing can harden, crack, or wear, leading to pressure loss, reduced flow, and poor priming. Replacing a worn packing with the BEDFORD 0551538 restores sealing performance and pump efficiency. This aftermarket part meets or exceeds OEM specifications for material compatibility and dimensional accuracy.

Service Guidance: When replacing the upper packing, inspect the piston rod for scoring or wear. Clean the packing groove and cylinder bore thoroughly. Lubricate the new packing with compatible grease before installation. Use a proper packing tool (e.g., 0551509) to avoid damaging the seal lips.

What it does and when to replace it

What the upper packing does
Pressure sealing Seals the piston rod during the pressure (outlet) stroke
Prevents bypass Stops paint from leaking past the piston back to the inlet side
Maintains efficiency Ensures full pump output and consistent spray pressure
When replacement is recommended
Pressure loss under load Sprayer cannot maintain pressure when gun is triggered
Poor priming Pump runs but fails to draw paint or build pressure
Visible wear or damage Cracked, flattened, or hardened packing during inspection
Routine pump rebuild Replace upper and lower packings together during overhaul

Compatibility

Part 0551538 (BEDFORD aftermarket) is compatible with the following models. Always verify with your machine's parts diagram before ordering.

Brand / Model Component
RentSpray 400 Upper packing (pump fluid section)
SprayTech Advantage EPX2155 Upper packing
SprayTech Advantage EPX2255 Upper packing

Related parts commonly serviced together

When replacing the upper packing, these related components are often inspected or replaced at the same time.

Lower packing

Replace both upper and lower packings as a set for even wear.

Piston rod

Inspect for scoring or corrosion; replace if damaged.

Backup ring / pressure ring

Check for deformation and replace if needed.

Frequently Asked Questions

0551538 is an aftermarket upper packing manufactured by BEDFORD. It is designed to meet or exceed OEM specifications for fit, material, and performance, offering a reliable alternative to the original part.

Common signs include the pump losing pressure when the gun is triggered, difficulty priming, paint leaking from the weep hole, and visible wear or flattening of the packing during inspection. If packings have not been replaced in over a year of heavy use, preventative replacement is recommended.

This packing fits RentSpray 400 and SprayTech Advantage EPX2155, EPX2255. Always check your parts diagram to confirm compatibility with your specific pump revision.

A packing installation tool (e.g., BEDFORD 0551509 or equivalent) is highly recommended to avoid damaging the sealing lips. Lubricate the packing before installation and drive it squarely into the bore using a soft‑face mallet.