Titan part 0537455 is a replacement fitting used to connect fluid passages, hoses, or components on compatible PowrBeast airless sprayers. Common applications include pump inlet/outlet connections, filter housings, and manifold assemblies where a secure, leak‑free seal is required.
| Part Number | 0537455 |
|---|---|
| Part Description | Fitting |
| Brand | Titan |
| Fits | PowrBeast 4700, 7700, 9700, 4700T |
| Condition | New |
The Titan 0537455 Fitting is an OEM fluid connector designed for PowrBeast 4700, 7700, 9700, and 4700T airless sprayers. It provides a leak‑proof connection between hoses, pumps, filters, or manifold blocks, and is typically made of brass, steel, or engineered plastic for durability under high pressure.
Fittings can fail due to cracking, thread damage, corrosion, or seal wear. A damaged fitting may cause fluid leaks, pressure loss, or air ingestion into the pump. Replacing with an OEM fitting ensures proper thread fit, correct material strength, and reliable sealing.
| Fluid connection | Joins hoses, pumps, filters, or manifold ports |
|---|---|
| Pressure sealing | Maintains leak‑free operation under high pressure |
| Thread adaptation | Converts between different thread types or sizes |
| Cracked or broken fitting | Visible damage from overtightening or impact |
|---|---|
| Stripped threads | Fitting spins or will not seal when tightened |
| Corrosion or pitting | Rust or chemical attack that compromises integrity |
| Persistent leakage | Leaks even after replacing seals or retightening |
Titan part 0537455 is a direct replacement fitting for the following PowrBeast models. Confirm the specific fitting location (inlet, outlet, drain, etc.) using your sprayer's parts diagram.
| Brand / Model | Components |
|---|---|
| PowrBeast 4700 | Fitting |
| PowrBeast 7700 | Fitting |
| PowrBeast 9700 | Fitting |
| PowrBeast 4700T | Fitting |
When replacing a fitting, inspect or replace these associated components to ensure a complete repair.
Many fittings use a bonded seal or O‑ring. Replace the seal whenever the fitting is removed.
If the fitting threads into a hose end, inspect the hose for cracks or swelling at the connection.
Check the female port for stripped threads or damage that could prevent a new fitting from sealing.
Copyright © 2024 AlltitanParts.com - All Rights Reserved.
