Titan 0533894 Packing kit PTFE

Name: Titan 0533894 Packing kit PTFE
Brand: Titan
SKU: 533894
Price: 147.56 USD
Availability: InStock

Sourced From:

Titan Tools Inc.

Titan WL64 PTFE Fluid-Section Packing Kit

The Titan 0533894 Packing Kit PTFE provides matched WL64 packing components for rebuilding upper and lower fluid-section sealing areas. Its PTFE configuration supports dependable pressure retention, reduced material bypass, and professional servicing of PowrCoat 1064 air-powered sprayers.

Brand: Titan Part: 0533894 Type: PTFE Packing Kit Application: WL64 Fluid Pump

Compatibility Table

Brand	Accurate Compatible Titan Machine(s)	Part Number	Parts / Assemblies Serviced With	Technical / Commercial Detail
Titan	PowrCoat 1064 Cart 05331064C; PowrCoat 1064 Wall Mount 05331064W	0533894	WL64 fluid pump; two 0533656 female glands; ten 0533657 PTFE V-packings; two 0533659 male glands	Matched PTFE repacking set for correcting fluid leakage, pressure loss, material bypass, and worn packing stacks.

Inspect the WL64 displacement rod, cylinder, glands, packing spring, and sealing surfaces before installation; scored hard parts can damage new PTFE packings and shorten service life.

Retail Price: $164.68

You save: $17.12 (10.40%)

Our Price: $147.56

Description

Titan WL64 PTFE Fluid-Section Packing Kit

Precision PTFE Packing Technology Restores WL64 Fluid Section Sealing Excellence Today

The Titan 0533894 packing kit provides the matched PTFE packings and supporting glands required to renew the WL64 fluid section. It helps PowrCoat 1064 operators restore dependable sealing, pressure retention, fluid displacement, and professional spraying performance.

Brand: Titan Part Number: 0533894 Type: PTFE Packing Kit Application: WL64 Fluid Pump

Technical Category	Product Information
Product Overview	Titan PTFE repacking package for the WL64 fluid pump installed on PowrCoat 1064 air-powered airless sprayers. The kit combines the primary fluid-section packing components needed for a coordinated sealing-system replacement.
Function	Renews the packing stacks surrounding the reciprocating displacement rod. Properly installed PTFE V-packings contain pressurized coating material, limit internal bypass, and support efficient fluid displacement throughout each pump stroke.
Industrial Applications	Suitable for servicing equipment used in structural steel finishing, corrosion protection, tank coating, roof coating, concrete rehabilitation, commercial painting, marine maintenance, and other high-production industrial coating work.
Accurate Compatible Titan Machines	Titan PowrCoat 1064 Cart, model 05331064C, and Titan PowrCoat 1064 Wall Mount, model 05331064W. These configurations use the WL64 fluid pump associated with this packing kit.
Accurate Part Number	Titan 0533894 — PTFE fluid-section packing kit for the WL64 pump. The kit is distinct from 0533893 for WL45 pumps and 0533895 for WL72 pumps.
Compatible Parts & Assemblies	WL64 fluid pump assembly, 0533656 female gland, ten 0533657 PTFE V-packings, and 0533659 male gland. These components form the supported PTFE packing arrangement within the fluid section.
Related Parts Commonly Serviced Together	Inspect the 0533666 packing spring, 0533667 gasket, 0533660 and 0533661 PTFE O-rings, 0533688 cylinder, 0533689 displacement rod, piston valve components, and inlet valve components during repacking.
Common Problems Solved	Helps correct fluid leakage around the displacement rod, worn packing stacks, pressure loss, internal material bypass, reduced pumping efficiency, inconsistent output, and excessive cycling caused by compromised fluid-section seals.
Use with Coating Systems	Designed for the WL64 severe-service pump used in PowrCoat 1064 pneumatic airless systems that apply professional architectural, protective, industrial, and high-viscosity coating materials.
OEM & Brand Information	Titan-branded repacking kit engineered around the dimensions and packing arrangement of the WL64 fluid section. Confirm the pump designation and sprayer model before ordering.
Commercial Benefits	Provides matched packing components in one package, simplifies parts selection, supports a consistent rebuild, reduces avoidable downtime, restores dependable pressure control, and helps extend the productive service life of PowrCoat 1064 equipment.

FAQ Section

Review these contractor-focused answers before repacking a Titan WL64 fluid pump.

Frequently Asked Questions
Which Titan machines use this PTFE packing kit? It fits the WL64 fluid pump installed on Titan PowrCoat 1064 Cart model 05331064C and PowrCoat 1064 Wall Mount model 05331064W.
What components are supplied in the PTFE packing kit? The kit services the WL64 packing arrangement with the female gland, ten PTFE V-packings, and male gland required for fluid-section repacking.
When should the WL64 packings be replaced? Replace them when coating material leaks around the displacement rod, pressure becomes unstable, output declines, the pump cycles excessively, or inspection reveals hardened, distorted, or worn packing lips.
Should hard fluid-section parts be inspected during repacking? Yes. Examine the displacement rod, cylinder, glands, packing spring, gasket, O-rings, and valve components. Scored or corroded hard parts can quickly damage new PTFE packings.
Does this kit fit WL45 or WL72 fluid pumps? No. This kit is assigned to the WL64 fluid section. WL45 pumps use Titan 0533893, while WL72 pumps use Titan 0533895.