Titan 0533660 O-ring Ptfe
OEM Titan Sealing Component
Titan 0533660 O-ring, PTFE is an OEM PTFE sealing ring used in the fluid section of compatible PowrCoat 1045, 1064, and 1072 spray systems.
Compatibility Table
PTFE O-ring provides superior chemical resistance, creates a leak-tight seal in the fluid section, and prevents material bypass.
Titan Sealing Component Replacement
Titan 0533660 O-ring, PTFE for PowrCoat Spray Systems
Titan 0533660 is an OEM PTFE O-ring designed for the fluid section on compatible PowrCoat 1045, 1064, and 1072 spray systems. This precision sealing component provides a leak-tight seal between critical fluid section components.
| Detail | Technical / Commercial Information |
|---|---|
| Product Overview | OEM Titan PTFE O-ring that provides a leak-tight seal between fluid section components on PowrCoat 1045, 1064, and 1072 spray systems. |
| Function | Provides a leak-tight seal between fluid section components, preventing material bypass and maintaining system pressure. PTFE material offers exceptional chemical resistance against paints, solvents, and cleaning agents. The PTFE construction ensures low friction and long service life in high-pressure applications. |
| Industrial Applications | Professional sprayer repair, fluid section maintenance, seal replacement, and rental fleet equipment servicing. |
| Compatible Titan Models | PowrCoat 1072 (WL72 fluid section), PowrCoat 1064 (WL64 fluid section), PowrCoat 1045. |
| Accurate Part Number | 0533660 O-ring, PTFE. |
| Related Parts Commonly Serviced Together | Leather packings, PTFE packings, female gland, male gland, pump block, and displacement rod. |
| Common Problems Solved | Fluid leaks from the fluid section, loss of system pressure, erratic pump operation, and contamination of the fluid stream caused by a worn, hardened, or damaged PTFE O-ring. |
| When Replacement Is Recommended | Replace if you observe fluid leaks in the fluid section, loss of system pressure, or when the O-ring shows visible wear, hardening, cracking, or flattening. Also replace during a complete pump rebuild. |
| Service Guidance | Lubricate the new PTFE O-ring with compatible grease or oil before installation to prevent pinching or rolling. Ensure the groove is clean and free of nicks or burrs. Do not overstretch the O-ring during installation. |
| OEM & Brand Information | Genuine Titan OEM component designed for correct fitment in compatible spray systems. |
| Commercial Benefits | Restores proper fluid section sealing, prevents fluid leaks, maintains system pressure, ensures reliable spray performance, and extends equipment service life. |
The 0533660 O-ring, PTFE is a critical sealing component for contractors who need reliable fluid section sealing on PowrCoat 1045, 1064, and 1072 sprayers. This PTFE O-ring provides a leak-tight seal between critical fluid section components, preventing material bypass and maintaining system pressure. PTFE material offers exceptional chemical resistance against paints, solvents, and cleaning agents, while also providing low friction and long service life in high-pressure applications. Over time, the O-ring can become worn, hardened, or damaged from chemical exposure, pressure cycling, and normal use. A worn or damaged O-ring can allow fluid leaks, loss of pressure, and erratic operation. If you observe fluid leaks from the fluid section or loss of system pressure, inspect the O-ring. Replacing a worn or damaged O-ring with this genuine part restores proper sealing and ensures reliable spray performance.
FAQ Section
Quick contractor-focused answers for confirming fitment, function, and service value.
No reviews yet. Be the first to review this product!
