0533576 Lubricator Bowl is a genuine OEM replacement lubricator bowl for Titan PowrCoat and AirCoat sprayers. This transparent bowl attaches to the lubricator body and holds the oil supply for the air motor lubrication system. A cracked, crazed, or leaking lubricator bowl can cause oil loss, inadequate lubrication, and potential air motor damage. Replacing the bowl restores proper oil containment and allows visual monitoring of oil level.
| Part Number | 0533576 |
|---|---|
| Part Description | Lubricator Bowl (transparent oil reservoir) |
| Brand | Titan |
| Fits | PowrCoat 630, AirCoat 423 |
| Condition | New |
The Titan 0533576 Lubricator Bowl is the transparent reservoir that attaches to the lubricator body on compatible sprayers. It holds the oil supply that is metered into the compressed air stream to lubricate the air motor. The translucent material allows operators to visually check oil level without removing the bowl.
Over time, lubricator bowls can become cracked, crazed (fine surface cracks), or clouded due to chemical exposure or impact. A damaged bowl may leak oil, causing inadequate lubrication of the air motor, leading to increased wear, noise, and eventual motor failure. Replacing the bowl with an OEM component restores oil containment and ensures clear visibility for routine maintenance checks.
| Oil reservoir | Holds lubricant supply for the air motor |
|---|---|
| Visual level check | Transparent design allows quick oil level inspection |
| Leak containment | Seals oil within the lubricator to prevent waste and mess |
| Visible cracks / crazing | Cracks or spiderweb lines in the plastic bowl |
|---|---|
| Oil leak | Oil seeping from bowl area |
| Clouding / opacity | Cannot see oil level through the bowl |
| Stripped threads | Bowl will not screw onto lubricator body properly |
Part 0533576 is the OEM lubricator bowl for the following Titan sprayer models. Always verify with your machine's parts diagram.
| Brand / Model | Component |
|---|---|
| PowrCoat 630 | Lubricator Bowl |
| AirCoat 423 | Lubricator Bowl |
When replacing the lubricator bowl, inspect or replace these related components.
The seal between bowl and lubricator body; replace if flattened or cracked.
If the bowl mounting threads are damaged, the body may also need replacement.
If the bowl leaked and oil level ran low, inspect the air motor for wear or scoring.
Copyright © 2024 AlltitanParts.com - All Rights Reserved.
