Please wait while we process your order...

Product successfully added to your cart.
Placeholder Image

Quantity in Cart: 1

Continue Shopping Shopping Cart
Item removed from Cart
X
 
×

AllTitanParts

(713) 931-0006

Titan 0533523 Gasket, ptfe

Titan 0533523 Gasket, ptfe

Sourced From:
Titan Tools Inc.

 

Titan part 0533523 is a PTFE gasket used to create a chemical‑resistant, leak‑tight seal between mating flanges on compatible PowrCoat and AirCoat spray systems. PTFE (polytetrafluoroethylene) provides excellent resistance to paints, solvents, and high temperatures.

Part Number 0533523
Part Description Gasket, Ptfe
Brand Titan
Fits
  • PowrCoat 630
  • AirCoat 423
Condition New

$5.6

 

PTFE Gasket for PowrCoat & AirCoat Spray Systems

The Titan 0533523 PTFE Gasket is an OEM sealing component designed for PowrCoat 630 and AirCoat 423 spray systems. Made from polytetrafluoroethylene (PTFE), this gasket provides outstanding chemical resistance against aggressive paint solvents, prevents fluid leakage, and withstands the temperatures encountered in airless and HVLP operation.

Over time, PTFE gaskets can become compressed, nicked, or lose their sealing ability due to repeated assembly cycles or chemical exposure. A damaged gasket will cause fluid leaks, pressure loss, or air ingestion. Replacing with an OEM PTFE gasket restores a reliable, long‑lasting seal.

Service Guidance: When replacing a PTFE gasket, clean both flange surfaces thoroughly. Do not use sealant or adhesive unless specified. PTFE gaskets are often reusable if undamaged, but replacement is recommended whenever the joint is opened. Torque fasteners evenly to avoid distorting the gasket.

What it does and when to replace it

What the PTFE gasket does
Chemical‑resistant seal Withstands aggressive paint solvents without swelling
High‑temperature tolerance Remains stable at elevated operating temperatures
Low friction surface Prevents sticking and allows easy disassembly
When replacement is recommended
Visible cracks or tears Gasket no longer intact
Compressed or flattened Permanent deformation reduces sealing pressure
Leakage at flange joint Fluid seeps even after proper torque
Disassembly of joint Replace gasket whenever the flange is opened for reliability

Compatibility

Titan part 0533523 is a direct replacement PTFE gasket for the following spray systems. Verify gasket size (inner/outer diameter and thickness) using your parts diagram.

Brand / Model Components
PowrCoat 630 Gasket, Ptfe
AirCoat 423 Gasket, Ptfe

Related parts commonly serviced together

When replacing a PTFE gasket, inspect or replace these associated components for a complete seal repair.

Flange faces

Clean both surfaces thoroughly and check for nicks or corrosion that could bypass the gasket.

Fasteners (bolts / nuts)

Replace any damaged or corroded fasteners to ensure even clamp load.

Backup washer (if used)

Some PTFE gaskets use a reinforcing ring. Replace if damaged.

Frequently Asked Questions

It is an OEM PTFE gasket for PowrCoat 630 and AirCoat 423 spray systems. It seals flange joints against paint and solvent leaks with excellent chemical resistance.

PTFE gaskets can sometimes be reused if they appear undamaged and have not taken a permanent compression set. However, for critical applications, replacement is recommended to ensure a leak‑free seal.

No. PTFE gaskets seal by compression alone. Do not use additional sealants or adhesives unless specified in your service manual. Excess sealant can contaminate the fluid system.

Tighten bolts evenly in a cross pattern to the torque specified in your manual. PTFE is soft and can extrude if over‑tightened. If no torque is given, tighten until the gasket is compressed and the joint no longer leaks — do not overtighten.

Copyright © 2024 AlltitanParts.com - All Rights Reserved.

Payment Methods