Part 0533375 is a replacement toggle pin for compatible Aircoat and Power coat equipment. This pin serves as a pivot point in toggle mechanisms, linkages, or latches, enabling smooth motion. When the original pin becomes worn, bent, or corroded, replacement restores proper mechanical function.
| Part Number | 0533375 |
|---|---|
| Part Description | Toggle Pin |
| Brand | Universal |
| Fits | Aircoat 423 GB_D_F; Power coat 630 GB_D_F |
| Condition | New |
The 0533375 toggle pin is a direct replacement pivot component for Aircoat 423 GB_D_F and Power coat 630 GB_D_F equipment. A toggle pin is a type of fastener or pivot pin used in mechanisms that involve a toggle action, such as linkages, clamps, latches, or levers. It typically has a head on one end and a hole for a cotter pin or other retainer on the other, or may be designed to be held in place by friction or a spring clip. The pin serves as a bearing surface, allowing connected parts to pivot smoothly. A properly fitting, smooth toggle pin is essential for free movement and accurate operation of the mechanism. A worn, bent, or corroded pin can cause binding, excessive play, and erratic operation, and may lead to premature wear of the components it connects. This replacement pin is manufactured to exact specifications for diameter, length, head style, and material. It is made from durable materials to withstand the loads and environment. Installation requires alignment of the linkage holes and proper installation of any retaining hardware. Regular inspection helps identify pins that need replacement.
| Pivot point | Provides pivot for toggle mechanisms |
|---|---|
| Linkage connection | Connects moving parts in assemblies |
| Bearing surface | Allows smooth rotation of components |
| Worn surface | Pin diameter reduced, causing play |
|---|---|
| Bent pin | Pin deformation affects alignment |
| Corrosion damage | Rust or pitting compromises pin |
| Binding / rough motion | Pin does not rotate freely |
Toggle pin 0533375 is compatible with the following models. Verify fit using your equipment's parts diagram.
| Compatible Models |
|---|
| Aircoat 423 GB_D_F |
| Power coat 630 GB_D_F |
When replacing the toggle pin, inspect these associated components to ensure proper mechanism function.
Check pivot holes for wear or elongation.
Replace cotter pins, clips, or washers if worn.
If equipped, check for wear.
Copyright © 2024 AlltitanParts.com - All Rights Reserved.
