Please wait while we process your order...

Product successfully added to your cart.
Placeholder Image

Quantity in Cart: 1

Continue Shopping Shopping Cart
Item removed from Cart
X
 
×

AllTitanParts

(713) 931-0006

Titan 0533130 Body Connector Assembly

Titan 0533130 Body Connector Assembly

Sourced From:
Titan Tools Inc.

 

0533130 is a body connector assembly used to join and seal fluid passages on compatible AirCoat and PowrCoat spray systems. It ensures leak‑free connection between major housing components, maintaining proper material flow and pressure integrity.

Part Number 0533130
Part Description Body Connector Assembly
Brand AirCoat / PowrCoat
Fits AirCoat 423; PowrCoat 630
Condition New

Retail Price: $46.6
You save: $3.54 (7.60%)
Our Price: $43.06

 

Body Connector Assembly for AirCoat 423 & PowrCoat 630

The 0533130 Body Connector Assembly is an OEM replacement component designed for the AirCoat 423 and PowrCoat 630 spray systems. It serves as the mechanical and hydraulic link between two main body sections, typically joining the fluid housing to the air motor or valve block. The assembly includes a precision‑machined connector body, sealing O‑rings, and a retaining ring to ensure a vibration‑resistant, leak‑tight seal.

Over time, the connector's O‑rings can harden or crack, the body can corrode, or the retaining ring may lose tension, leading to external leaks, pressure loss, or material contamination. Replacing the complete assembly with 0533130 restores proper sealing and structural integrity.

Service Guidance: Always replace all O‑rings and seals when servicing the connector. Clean mating surfaces thoroughly and apply a light lubricant to O‑rings during installation to prevent pinching. Torque retaining hardware to manufacturer specs.

What it does and when to replace it

What the body connector assembly does
Fluid passage joining Connects two main housing sections to create a sealed fluid path
Leak prevention O‑rings and precision fit stop material from escaping under pressure
Structural integrity Maintains alignment and rigidity between connected components
When replacement is recommended
External fluid leak Paint or material seeping from the joint area
Pressure drop Loss of spray pressure without other valve/packing issues
Corrosion / pitting Visible rust, pitting, or chemical attack on connector body
Damaged O‑rings Cracked, flattened, or extruded seals during inspection

Compatibility

Part 0533130 is designed for the following models. Always verify with your parts diagram.

Brand / Model Component
AirCoat 423 Body connector assembly (fluid housing to air motor / valve block)
PowrCoat 630 Body connector assembly (fluid housing to air motor / valve block)

Related parts commonly serviced together

When replacing the body connector, these related components are often inspected or replaced at the same time.

Gasket / seal kit

All O‑rings and seals at the joint should be renewed together.

Fluid housing section

Inspect mating surfaces for cracks or warpage.

Air motor mounting plate

Check for flatness and thread integrity.

Frequently Asked Questions

The assembly includes the machined connector body, all necessary sealing O‑rings (typically two or more), and a retaining ring or snap ring. It is sold as a complete, ready‑to‑install unit.

Look for wet spots, dried paint residue, or bubbling at the joint between the fluid housing and adjacent component. You may also notice a gradual pressure drop or material seeping down the exterior of the sprayer during operation.

If the connector body itself is not corroded, pitted, or worn, and the retaining ring is intact, you may only need a seal kit. However, for complete reliability and to avoid rework, many technicians replace the entire assembly, especially on older equipment.

Yes. This part is confirmed for both AirCoat 423 and PowrCoat 630. Always consult your parts diagram to confirm, as revision changes may occur.

Copyright © 2024 AlltitanParts.com - All Rights Reserved.

Payment Methods