Part number 800-541 is a gasket shroud designed for multiple airless sprayer models including 1140IX, 1140I, 840I, 840IX, Performer 1140IX, and Speeflo PowrTex 1200 SF. This gasket provides a critical seal between components, preventing fluid leaks and maintaining proper pressure. A worn, compressed, or damaged gasket can cause leaks, pressure loss, and operational inefficiency. Replacing it restores a tight seal and reliable performance.
| Part Number | 800-541 |
|---|---|
| Part Description | Gasket Shroud |
| Brand | Genuine Replacement Part |
| Fits Models | Airless Sprayer 1140IX, 1140I; Airless Digital Sprayer 1140IX; Airless Sprayer 840I, 840IX; Airless Digital Sprayer 840IX; Performer 1140IX; Speeflo PowrTex 1200 SF |
| Condition | New |
The 800-541 gasket shroud is a sealing component used in various airless sprayer models including the 1140IX, 1140I, 840I, 840IX, Performer 1140IX, and Speeflo PowrTex 1200 SF. It is designed to create a leak‑tight seal between mating surfaces, such as the pump housing, motor assembly, or fluid section, preventing paint or other materials from escaping during operation.
Manufactured from materials resistant to solvents and high pressure, this gasket maintains its sealing properties under demanding conditions. Over time, gaskets can become compressed, brittle, or damaged due to heat, chemical exposure, or improper installation. A failing gasket can result in fluid leaks, pressure loss, air ingress, and reduced spraying efficiency. Replacing a worn gasket with genuine 800-541 restores a proper seal, ensuring consistent performance and preventing damage to surrounding components.
| Fluid sealing | Prevents paint and other fluids from leaking at component joints |
|---|---|
| Pressure retention | Helps maintain system pressure by sealing internal passages |
| Contaminant exclusion | Keeps dirt and debris out of critical areas |
| Fluid leakage | Paint seeping from the sealed joint |
|---|---|
| Compression set | Gasket is flattened and no longer springs back |
| Cracks / tears | Visible damage to the gasket material |
| Brittleness | Gasket has hardened and lost flexibility |
Part 800-541 is designed to fit the following models. Always verify your model number and revision before ordering.
| Brand / Series | Compatible Model |
|---|---|
| Airless Sprayer | 1140IX |
| Airless Sprayer | 1140I |
| Airless Digital Sprayer | 1140IX |
| Airless Sprayer | 840I |
| Airless Sprayer | 840IX |
| Airless Digital Sprayer | 840IX |
| Performer | 1140IX |
| Speeflo PowrTex | 1200 SF |
When replacing the gasket shroud, consider inspecting these associated components:
Check for burrs, scratches, or corrosion that could affect sealing.
Bolts and nuts should be clean and torqued to specification.
Other seals in the area may also be worn and need replacement.
Copyright © 2024 AlltitanParts.com - All Rights Reserved.
