Titan 05331064C PowrCoat 1064 PowrCoat 1064 Cart Mount, Bare
$7,417.35
$9,214.10
Save 20%
In Stock
OEM Titan Air-Powered Protective Coating Sprayer
Engineered for demanding professional coating production, the Titan 05331064C PowrCoat 1064 Cart Mount, Bare is a mobile pneumatic airless sprayer with a 64:1 pressure ratio, delivering high fluid pressure for industrial and protective-coating applications requiring dependable air-powered performance.
Brand: Titan Part Number: 05331064C Type: PowrCoat 1064 Cart Application: Protective Coatings
The PowrCoat 1064 uses a 10-inch air motor with a 4.75-inch stroke, 64:1 pressure ratio and 3.15 GPM maximum delivery, providing up to 6,400 PSI fluid pressure from a maximum 100 PSI air inlet.
Exact model: PowrCoat 1064 Cart — 05331064C. Titan 05331064W is the separate PowrCoat 1064 Wall Mount configuration.
Quantity
Genuine OEM Part
Fast Shipping
Easy Returns
Titan OEM Air-Powered Protective Coating Equipment
Shop Titan PowrCoat 1064 for Heavy-Duty Coating Production Jobs
Built for professional crews applying demanding protective coatings, the Titan PowrCoat 1064 05331064C is the bare cart-mount configuration of Titan's pneumatic airless platform. Its 64:1 pressure ratio, 6,400 PSI maximum operating pressure and 3.0 GPM output support high-pressure industrial coating production.
Brand: Titan Model: PowrCoat 1064 Configuration: Cart Mount, Bare Pressure Ratio: 64:1 Maximum Pressure: 6,400 PSI Maximum Delivery: 3.0 GPM
| Titan PowrCoat 1064 Technical & Commercial Details | |
|---|---|
| Product Overview | The PowrCoat 1064 is a professional air-powered airless sprayer designed for high-pressure protective-coating work. The 05331064C configuration combines a 10-inch pneumatic air motor, 4.75-inch stroke and 64:1 pressure ratio with a heavy-duty mobile cart. Maximum operating pressure is 6,400 PSI, with up to 3.0 GPM delivery at 60 cycles per minute. |
| Function | Compressed air drives the pneumatic motor, which reciprocates the WL64 fluid section and pressurizes coating material for airless atomization. The 64:1 ratio allows the machine to generate high fluid pressure from regulated compressed air, providing a practical solution for industrial sites where pneumatic coating equipment is preferred. |
| Industrial Applications | Designed for professional protective-coating and industrial finishing operations requiring high pressure and sustained material delivery. Applications can include structural steel, industrial maintenance, corrosion-control projects and other demanding airless coating work when the coating chemistry, viscosity, spray tip and connected equipment are suitable for the system. |
| Accurate Compatible Titan Machines | This product is a complete machine configuration rather than a replacement component intended for installation across multiple Titan models. The exact unit is Titan PowrCoat 1064 Cart Mount, model 05331064C. Titan also produces PowrCoat 1064 Wall Mount, model 05331064W, which uses the same 64:1 PowrCoat 1064 platform but has a different mounting configuration. PowrCoat 1045 and PowrCoat 1072 are separate machines and should not be treated as alternate part numbers for this unit. |
| Accurate Part Number | Titan 05331064C — PowrCoat 1064 Cart Mount, Bare. The “C” configuration identifies the cart-mounted machine. Titan 05331064W is the separate wall-mounted PowrCoat 1064 configuration and should not be substituted when the cart assembly is required. |
| Compatible Parts & Assemblies | The PowrCoat 1064 platform incorporates a WL64 Severe Service™ fluid section, 10-inch pneumatic air motor, AirCare™ filter-regulator-lubricator system, piston-lubrication system and high-capacity outlet filtration. Verified WL64 service components include 0533937 fluid-pump repair kit, 0533657 PTFE V-packing, 0533658 leather V-packing, 0533685 outlet housing, 0533688 cylinder and 0533689 displacement rod. Titan 0533259 is the optional 1-inch 55-gallon material suction feed assembly. |
| Related Parts Commonly Serviced Together | During fluid-section service, inspect the PTFE and leather packing stack, displacement rod, cylinder, upper and lower valve components, outlet housing and mating sealing surfaces. Contractors should also inspect the suction system, outlet filter, AirCare components, fluid fittings, high-pressure hose connections and spray equipment before replacing parts solely on the basis of pressure loss or irregular cycling. |
| Common Problems Solved | The PowrCoat 1064 provides a high-pressure pneumatic platform for production work that can exceed the practical pressure capability of lower-ratio air-powered sprayers. Its outlet filtration helps reduce tip plugging, while the AirCare system filters, regulates and lubricates the incoming air supply to support consistent pneumatic-motor operation. |
| Use with Coating Systems | The 1064 is intended for professional air-powered airless coating systems supplied by an appropriately sized compressor. Maximum air inlet pressure is 100 PSI. Fluid displacement is 188 cc per cycle, with approximately 57.7 SCFM of air required per gallon of output at 100 PSI. Titan specifies approximately 174 CFM as the maximum recommended air-volume requirement. |
| OEM & Brand Information | Genuine Titan professional coating equipment from Titan Tool. The PowrCoat family is Titan's pneumatic airless platform for high-performance protective-coating applications. Within this range, the PowrCoat 1064 combines a 64:1 ratio and 6,400 PSI maximum operating pressure with Titan's serviceable fluid-section and air-management architecture. |
| Commercial Benefits | Contractors gain a mobile, high-pressure pneumatic sprayer capable of 3.0 GPM output at 60 CPM. The heavy-duty cart, 16-inch pneumatic tires, lift handles, crane hook, hose-management provisions, AirCare system, outlet filtration and serviceable WL64 pump architecture are designed to support demanding production environments while simplifying transport, setup and maintenance. |
Contractor Configuration Note
The 05331064C is specifically the bare cart-mounted PowrCoat 1064. Its 64:1 pneumatic system is rated for up to 6,400 PSI fluid pressure from a maximum 100 PSI air inlet and delivers approximately 3.0 GPM at 60 cycles per minute.
Compressor sizing is critical for production performance. Titan lists approximately 174 CFM as the maximum recommended air-volume requirement for the 1064. Contractors planning bulk material supply can use the verified 0533259 optional 1-inch 55-gallon suction-feed assembly. All connected hoses, guns, fittings and spray accessories must be appropriately rated for the operating pressure.
FAQ Section
Review these contractor-focused answers when selecting and setting up the PowrCoat 1064.
What are the pressure and output ratings of the Titan PowrCoat 1064?The PowrCoat 1064 has a 64:1 pressure ratio and a maximum operating pressure of 6,400 PSI. Maximum air inlet pressure is 100 PSI, and Titan specifies approximately 3.0 GPM material delivery at 60 cycles per minute with 188 cc of fluid displacement per cycle.
|
Is 05331064C the cart-mounted or wall-mounted PowrCoat 1064?Titan 05331064C is the PowrCoat 1064 Cart Mount, Bare configuration. Titan 05331064W is the separate wall-mount version. Contractors should confirm the complete model number before ordering because the mounting hardware and configuration-specific components differ.
|
How much compressed air does the PowrCoat 1064 require?Titan specifies approximately 57.7 SCFM of air per gallon of output at 100 PSI and approximately 174 CFM as the maximum recommended air-volume requirement. Actual air consumption varies with pump speed and material output, so the compressor should be sized for the intended production demand.
|
Can the PowrCoat 1064 use a 55-gallon material supply?Yes. Titan identifies 0533259 as the optional 1-inch 55-gallon material suction feed assembly for the PowrCoat 1064. It is also specified for the 1045 and 1072 platforms, but the complete sprayers themselves remain distinct models with different pressure ratios and performance specifications.
|
Which fluid-section parts should contractors inspect when a PowrCoat 1064 loses pressure?Inspect the WL64 packing stack, displacement rod, cylinder, inlet and outlet valve areas, outlet housing and connected seals before deciding which component requires replacement. Verified service parts include the 0533937 pump repair kit, 0533657 PTFE V-packing, 0533658 leather V-packing, 0533685 outlet housing, 0533688 cylinder and 0533689 displacement rod.
|
No reviews yet. Be the first to review this product!