Titan 0532925 Inlet Pusher Kit
Restore the inlet valve release mechanism with the Titan 0532925 Inlet Pusher Kit, a replacement service kit for designated Titan airless sprayer fluid sections. The inlet pusher mechanism is used to help free a sticking inlet valve ball when the pump has difficulty priming. Replacing worn or damaged pusher components helps maintain the intended manual inlet-valve release function. This kit is intended for compatible Titan pump configurations that specifically list part 0532925. Verify your sprayer model, fluid-section assembly, and kit contents before ordering.
Function: Services the inlet valve pusher mechanism.
Application: Specified Titan airless sprayer fluid sections.
Selection: Match part number 0532925 to the pump parts diagram.
Fitment Note: Inlet pusher kits are not universal. Confirm the exact Titan model and fluid-section revision before purchasing.
Restore Inlet Valve Release Function with Titan 0532925 Inlet Pusher Kit
Repair the inlet pusher mechanism on compatible cart-mounted airless sprayers with the Titan 0532925 Inlet Pusher Kit. Titan identifies this service kit specifically for the Impact 340 Cart and Impact 400 Cart configurations. The inlet pusher mechanism allows the operator to help free a sticking inlet valve ball when the pump is difficult to prime. The kit provides the designated inlet pusher service components and includes the Titan 805-408 siphon tube according to the Impact 400 manufacturer parts documentation. Choose this cart-model kit when your sprayer requires part 0532925 rather than the separate 0532924 stand-model kit. Proper fitment and installation help restore the intended inlet-valve release mechanism without unnecessarily replacing the entire fluid section.
Which Titan Sprayers Use 0532925 Inlet Pusher Kit?
Titan Impact 340 Cart Airless Sprayer
The Titan Impact 340 owner's manual lists 0532925 under optional service kits as the inlet pusher kit for the cart model. Use the cart-model fluid-section diagram to confirm the correct service configuration.
Titan Impact 400 Cart Airless Sprayer
The Titan Impact 400 service documentation identifies 0532925 as the cart-model inlet pusher kit. The parts listing specifies the associated fluid-section items and siphon tube 805-408.
Stand and Skid Models
For the corresponding Impact 340 and Impact 400 stand/skid configurations, Titan identifies 0532924 Inlet Pusher Kit. Do not assume that the cart kit and stand kit are interchangeable.
Fitment Warning: The machine's mounting configuration matters. Confirm whether your sprayer is a cart or stand model before selecting the inlet pusher kit.
How the Titan 0532925 Inlet Pusher Kit Supports Pump Priming
The inlet valve in an airless sprayer allows coating material to enter the pump fluid section. When the inlet valve ball becomes stuck against its seat, the pump may struggle to draw material from the container during priming.
The inlet pusher mechanism provides a manual means of helping release a sticking inlet valve ball. This function can be useful after the sprayer has been stored or when coating residue interferes with normal valve movement.
The Titan 0532925 Inlet Pusher Kit supplies the manufacturer-designated components for servicing this mechanism on compatible cart-mounted Impact sprayers. The cart kit also includes the specified siphon tube, distinguishing it from the stand-model kit.
A functioning pusher mechanism does not replace proper inlet-valve maintenance. If the inlet ball, seat, seals, or other fluid-section components are damaged, those faults must be diagnosed and repaired separately.
Signs Your Titan Inlet Pusher Mechanism Needs Service
Damaged pusher mechanism: The pusher does not move or engage as intended.
Broken retaining component: The pusher clip or associated retaining hardware is damaged or missing.
Seal deterioration: The related O-ring shows wear, cuts, or other damage.
Difficulty freeing the inlet ball: The manual release mechanism fails to perform its intended function.
Damage during maintenance: Pusher components or the associated siphon connection are damaged during disassembly.
Diagnostic Note: Failure to prime can also result from an obstructed inlet screen, leaking suction connection, worn inlet valve ball or seat, or other pump faults. Inspect the complete fluid section before selecting a repair kit.
Titan 0532925 Inlet Pusher Kit Replacement Guide
Safety Warning: Airless sprayers can retain dangerous fluid pressure. Shut down the equipment, disconnect power, and perform the complete pressure-relief procedure specified in the applicable Titan manual before disassembling the pump.
Step 1: Confirm the sprayer configuration. Verify that your machine is an Impact 340 Cart or Impact 400 Cart and that the correct service kit is 0532925.
Step 2: Review the fluid-section diagram. Identify the inlet pusher components and siphon tube listed for your specific machine.
Step 3: Inspect the inlet system. Check for stuck valve components, worn seals, damaged retaining hardware, and suction connection defects.
Step 4: Access the pusher mechanism. Follow the manufacturer instructions for the relevant cart-model fluid section.
Step 5: Remove damaged components. Use appropriate tools and avoid damaging the inlet housing, sealing surfaces, or adjacent pump components.
Step 6: Inspect the kit contents. Match the supplied components to the manufacturer parts list, including the applicable siphon tube.
Step 7: Install the replacement components. Follow the specified assembly order, seal positioning, and manufacturer service procedures.
Step 8: Check pusher movement. Confirm that the mechanism operates correctly without binding or misalignment.
Step 9: Reassemble the suction system. Verify that the siphon tube and associated connections are correctly installed.
Step 10: Test the sprayer. Follow Titan's priming and operational testing instructions. Inspect for leakage and confirm proper inlet-valve operation before returning the equipment to service.
Related Titan Impact 340 and Impact 400 Repair Parts
The following Titan parts are associated with the inlet pusher mechanism or the surrounding fluid-section repair system.
Related repair parts are separately numbered products. Kit contents should be verified against the manufacturer parts diagram.
Buy Titan 0532925 Inlet Pusher Kit
Find the Titan 0532925 Inlet Pusher Kit for compatible Impact 340 Cart and Impact 400 Cart sprayers at AllTitanParts. Order the correct cart-model repair kit and restore the designated inlet-valve release mechanism.
Shop Titan 0532925 Inlet Pusher KitFrequently Asked Questions
Answers about Titan 0532925 Inlet Pusher Kit compatibility, contents, and replacement.
What is Titan 0532925 Inlet Pusher Kit?
It is a manufacturer-listed service kit for the inlet pusher mechanism on compatible cart-mounted Titan Impact airless sprayers.
Which Titan sprayers use part 0532925?
Titan's official manuals identify the Impact 340 Cart and Impact 400 Cart as applications for inlet pusher kit 0532925.
Does Titan 0532925 fit Impact 340?
Yes, for the cart-model configuration specified in the Impact 340 service documentation. The stand model uses a different kit.
Does Titan 0532925 fit Impact 400?
Yes. Titan identifies 0532925 as the inlet pusher kit for the Impact 400 cart model.
What is the difference between 0532924 and 0532925?
Titan 0532924 is the stand-model inlet pusher kit. Titan 0532925 is the cart-model inlet pusher kit, which includes the specified siphon tube in the Impact 400 parts documentation.
Does Titan 0532925 include a siphon tube?
Yes. The Impact 400 parts documentation lists siphon tube 805-408 among the cart-model kit contents.
Can the inlet pusher help with priming problems?
The mechanism helps release a sticking inlet valve ball, which can interfere with priming. Other priming faults require separate diagnosis.
Does this kit replace the entire fluid section?
No. Part 0532925 services the inlet pusher mechanism and includes designated related components. It is not a complete fluid-section replacement.
When should the inlet pusher kit be replaced?
Replacement may be appropriate when the pusher mechanism or its related seals and retaining components are worn, damaged, missing, or no longer operating as specified.
Where can I buy Titan 0532925 Inlet Pusher Kit?
Find the Titan 0532925 Inlet Pusher Kit in the AllTitanParts Impact 400 parts catalog. Confirm cart-model compatibility before ordering.
No reviews yet. Be the first to review this product!