Part number 02976 is a Fine Strainer that filters coating material to remove particles and debris before they enter the pump on compatible SprayTech airless sprayer systems. This replaceable mesh screen ensures consistent spray performance and protects internal components from contamination.
| Part Number | 02976 |
|---|---|
| Part Description | Fine Strainer |
| Fits | SprayTech Airless EP2205 |
| Condition | New |
Part number 02976 is a Fine Strainer specifically engineered for the SprayTech Airless EP2205 professional airless paint sprayer. The EP2205 is a lightweight, portable unit designed for residential, commercial, and light industrial applications, capable of spraying a variety of coatings including latex paints, stains, and primers. This fine mesh strainer is installed in the fluid intake path, typically within the siphon tube assembly or pump inlet, to filter out particles and debris before they can enter the pump. By removing contaminants, the strainer protects critical pump components such as packings, valves, and the spray tip from damage and clogging, ensuring consistent spray performance and extending equipment life.
The fine mesh rating provides effective filtration for applications requiring higher finish quality, capturing smaller particles that could otherwise cause imperfections in the spray pattern or clog the precision nozzle. The stainless steel mesh construction is durable and resistant to solvents and cleaning chemicals, allowing for multiple cleanings before replacement is required. The strainer is precision-sized to fit securely in its housing, preventing bypass that would allow unfiltered material to enter the system. Regular inspection and cleaning of the strainer is essential for maintaining proper flow and spray performance.
Strainers are subjected to continuous contamination loading and require regular inspection and cleaning. A clogged strainer restricts material flow, causing sputtering, reduced spray pressure, and poor atomization. A torn or damaged strainer allows debris to pass through, potentially clogging the nozzle or damaging internal seals. Replacement with genuine 02976 fine strainer ensures continued protection and reliable performance of the EP2205 sprayer. Keeping a clean strainer is one of the most important preventive maintenance tasks for airless sprayers.
| Particle Filtration | Traps debris before it enters the pump |
|---|---|
| Component Protection | Prevents damage to packings, valves, and spray tip |
| Spray Quality | Ensures consistent pattern by removing contaminants |
| Visible Clogging | Mesh is loaded with debris that cannot be cleaned |
|---|---|
| Physical Damage | Strainer is torn, bent, or has holes in mesh |
| Flow Restriction | Sputtering or reduced pressure due to clogged strainer |
| Preventive Maintenance | Replace after extended use or when changing material types |
Part number 02976 is specifically designed for the SprayTech Airless EP2205 professional airless paint sprayer. The EP2205 is a lightweight, portable unit designed for residential, commercial, and light industrial applications, capable of spraying a variety of coatings including latex paints, stains, and primers. This fine strainer is a model-specific component engineered for the filtration requirements and mounting configuration of this particular sprayer system. Always confirm fitment using the correct parts diagram for your exact model and serial number.
| Compatible Models | Component |
|---|---|
| SprayTech Airless EP2205 | Fine Strainer |
The fine strainer is the first line of defense in the fluid system. When servicing this component, these related parts are often inspected or replaced at the same time.
Often houses the strainer. Inspect for damage and ensure proper fit.
Downstream from strainer. Debris passing a damaged strainer can lodge here.
Final component affected by contamination. Inspect for clogs if strainer is damaged.
Copyright © 2024 AlltitanParts.com - All Rights Reserved.
