Titan 0295905 Prime Spray Valve Kit
OEM SprayTech Valve Kit
Titan 0295905 Prime Spray Valve Kit is a genuine OEM replacement assembly that controls prime and spray functions on SprayTech EP2105, EP2205, and EP2005 airless sprayers.
Kit Contents
- Valve Body Components — valve, seat, and stem assembly for flow control.
- Spring and Retaining Hardware — metal spring, lock washer, retaining nut, and two retaining clips.
- Knob and Housing — plastic knob and housing for mode selection.
- Nozzle — directs fluid flow between prime and spray circuits.
Contents as documented in OEM parts references. Confirm fitment against your specific model and serial number before ordering.
Compatibility Table
OEM prime spray valve kit restores proper prime and spray switching, eliminates leakage, and ensures reliable pressure control.
Titan Prime/Spray Valve Replacement
Titan 0295905 Prime Spray Valve Kit for EP2105 & EP2205
Titan 0295905 is a genuine OEM prime spray valve kit designed for SprayTech EP2105, EP2205, and EP2005 airless sprayers. This complete assembly controls the flow of material between the prime/recirculation circuit and the spray/pressure circuit.
| Detail | Technical / Commercial Information |
|---|---|
| Product Overview | Genuine OEM prime spray valve kit for SprayTech EP2105, EP2205, and EP2005 airless sprayers. A complete replacement assembly for the prime/spray selector valve. |
| Function | In the PRIME position, directs fluid to recirculate back to the supply tank, allowing the pump to purge air and prime without building high pressure. In the SPRAY position, directs fluid to the spray gun for application. Provides reliable mode switching and positive shut-off between circuits. |
| Compatible Models | SprayTech Airless EP2105, EP2205, and EP2005. |
| OEM Part Number | 0295905 Prime Spray Valve Kit. |
| Related Parts Commonly Serviced Together | Inlet strainer and siphon hose, pump inlet valve, and pressure control assembly (transducer and control board). Inspect these components when diagnosing priming or pressure issues. |
| Common Problems Solved | Difficulty priming, failure to build or maintain pressure, fluid leaking from the valve stem or body, and a stiff or stuck lever that will not switch between positions. |
| Commercial Benefits | Restores proper prime and spray switching, eliminates leakage, and ensures reliable pressure control. A genuine SprayTech replacement kit that meets original equipment specifications for valve body material, seal composition, stem design, and flow capacity. |
The 0295905 Prime Spray Valve Kit is a critical control component that directs fluid flow between prime and spray modes. Over time, exposure to abrasive paints, solvents, and pressure cycling causes valve components to wear, seals to degrade, or the stem to become stiff. A worn or damaged valve can cause difficulty priming, failure to build pressure, leakage from the valve stem, or inability to switch between modes. When installing a new kit, ensure all sealing surfaces are clean, lubricate O-rings with compatible grease, and verify smooth operation through both positions before pressurizing. Flush the sprayer thoroughly after each use to prevent dried material buildup, and store the valve in the prime position to relieve spring pressure when not in use.
Frequently Asked Questions
No reviews yet. Be the first to review this product!