SprayTech part 0295904 is a fluid section repacking kit containing all necessary seals, packings, and o-rings to rebuild the pump fluid section on compatible sprayers. This kit includes T-lip packings, spacers, and seals to restore pump performance and prevent fluid bypass. A worn fluid section can cause pressure fluctuations, reduced output, and material leakage. Rebuilding with this genuine SprayTech kit restores proper sealing and extends pump life on the Airless EP2205.
| Part Number | 0295904 |
|---|---|
| Part Description | Fluid Section Repacking Kit |
| Brand | SprayTech |
| Fits | SprayTech Airless EP2205 |
| Condition | New |
The 0295904 Fluid Section Repacking Kit contains all the wearable seals, packings, and o-rings needed to rebuild the fluid section of the SprayTech Airless EP2205 pump. This comprehensive kit includes upper and lower T-lip packings, spacers, and associated seals to restore the pump's ability to generate and maintain pressure.
Over time, the T-lip packings and seals in the fluid section wear out due to friction, heat, and exposure to abrasive materials [citation:1]. Worn packings can lead to material bypass, pressure loss, spitting, and reduced efficiency. Rebuilding the fluid section with this genuine SprayTech kit restores original pump performance and extends the service life of your equipment [citation:2].
| Upper T‑lip packing | Seals the top of the piston to prevent fluid bypass |
|---|---|
| Lower T‑lip packing | Provides primary sealing at the lower end of the fluid section |
| Upper/lower spacers | Position and support packings within the cylinder |
| Complete restoration | Renews all wearable seals to restore pump performance |
| Pressure loss | Inability to maintain consistent pressure under load |
|---|---|
| Fluid leakage | Material leaking from fluid section or around piston |
| Reduced output | Lower flow rate than normal operation |
| Visible wear | Deteriorated, hardened, or damaged packings during inspection |
SprayTech part 0295904 is specifically designed for the following sprayer model. Always confirm fitment using the correct parts diagram for your exact model.
| SprayTech Model | Component |
|---|---|
| SprayTech Airless EP2205 | Fluid Section Repacking Kit |
When rebuilding the fluid section, consider inspecting or replacing these associated components to ensure complete pump restoration.
Inspect piston for scoring or wear; replace if damaged for proper sealing with new packings [citation:2].
Worn valves can affect performance; consider rebuilding simultaneously [citation:1].
Specialized tool for installing T-lip packings without damage, recommended for maximum packing life [citation:2].
Copyright © 2024 AlltitanParts.com - All Rights Reserved.
