Titan part 0295378 is an upper T‑lip seal (packing) used in the fluid section of the SprayTech Airless EP2205 sprayer. This seal helps prevent fluid bypass and pressure loss around the piston rod, ensuring consistent output and reliable operation.
| Part Number | 0295378 |
|---|---|
| Part Description | Upper T‑lip Seal / Packing |
| Brand | Titan |
| Fits | SprayTech Airless EP2205 |
| Condition | New |
The Titan 0295378 Upper T‑lip Seal (Packing) is a critical wear component in the fluid section of the SprayTech EP2205 airless paint sprayer. It creates a high‑pressure seal around the reciprocating piston rod, preventing coating material from leaking upward into the pump housing or losing pressure during operation.
A worn or damaged upper T‑lip seal can cause erratic spray pattern, reduced output pressure, fluid leakage from the pump throat, or complete loss of priming. Replacing this seal restores proper hydraulic sealing and extends the life of the pump.
| Prevents fluid bypass | Stops coating material from leaking past the piston rod |
|---|---|
| Maintains pressure | Helps keep operating pressure consistent for a steady spray fan |
| Reduces contamination | Keeps pressurized fluid from entering the pump crankcase or exterior |
| Fluid leaking from pump throat | Visible drips or wetness around the upper packing area |
|---|---|
| Loss of pressure / surging | Sprayer builds pressure slowly, surges, or won't reach full pressure |
| Erratic spray pattern | Fans tail, spit, or fluctuate due to internal bypass |
| After piston rod replacement | Always install a new T‑lip seal when replacing or resurfacing the rod |
Titan 0295378 is specifically designed for the SprayTech Airless EP2205. Confirm your sprayer model and revision using the parts diagram.
| Brand / Model | Component |
|---|---|
| SprayTech Airless EP2205 | Upper T‑lip Seal (Packing) |
When replacing the upper T‑lip seal, these additional parts are often inspected or replaced at the same time for a complete fluid section overhaul.
Works with the upper seal to create the full pressure barrier. Wear often occurs together.
Scored or worn rods will quickly damage a new seal. Inspect and replace if necessary.
Prevents external leaks at the pump housing; often replaced with the T‑lip seal.
Copyright © 2024 AlltitanParts.com - All Rights Reserved.
