SprayTech part 0295357 is a polyethylene return hose used to route excess paint or fluid back to the container or pump inlet. It is designed to withstand the chemical and pressure demands of airless sprayers. A cracked, kinked, or leaking return hose can cause loss of prime, pressure fluctuations, or fluid waste. Replacing the return hose restores proper fluid circulation and system efficiency.
| Part Number | 0295357 |
|---|---|
| Part Description | Return Hose (Polyethylene) |
| Brand | SprayTech |
| Fits | Airless Sprayer EP2105, EP2205 |
| Condition | New |
The SprayTech 0295357 Return Hose is a flexible polyethylene tube that carries excess paint or fluid from the pressure control assembly back to the container or pump inlet. It is a critical component of the recirculation system, helping to maintain consistent pressure, prevent over-pressurization, and reduce fluid waste during priming or pressure relief.
Over time, the return hose can become brittle, cracked, or kinked, especially if exposed to harsh solvents or repeated flexing. A compromised hose can lead to loss of prime, erratic spray performance, or leaks that waste material. Replacing it with this genuine SprayTech polyethylene hose restores proper fluid return and ensures reliable operation.
| Fluid recirculation | Returns unused paint to the container to maintain pressure balance |
|---|---|
| Pressure relief | Provides a path for excess pressure to safely return when trigger is released |
| Priming support | Helps draw fluid from the container during initial startup |
| Visible cracks or leaks | Cracks, splits, or weeping fluid along the hose |
|---|---|
| Loss of prime | Sprayer struggles to prime or loses prime frequently |
| Kinks or flattening | Hose is permanently deformed, restricting flow |
| Chemical degradation | Hose becomes soft, swollen, or brittle due to solvent exposure |
SprayTech part 0295357 is a direct replacement return hose for the following airless sprayers. Always verify fitment using the parts diagram for your exact model.
| Model | Component |
|---|---|
| Airless Sprayer EP2105 | Return hose (polyethylene) |
| Airless Sprayer EP2205 | Return hose (polyethylene) |
When replacing the return hose, consider inspecting these associated components.
Clamps may loosen or corrode; inspect and replace if needed.
The return port and pressure regulator may be affected if the hose failed.
Clogged filters can create back pressure; check during service.
Copyright © 2024 AlltitanParts.com - All Rights Reserved.
