Titan part 0295311 is a lower seal, T‑lip, 0.30 used in the fluid section of the SprayTech Airless EP2105 sprayer. This T‑lip seal provides enhanced sealing against the piston rod, preventing fluid bypass and maintaining pumping pressure. Replace a worn, cracked, or leaking T‑lip seal to restore proper sealing, eliminate pressure loss, and extend pump life.
| Part Number | 0295311 |
|---|---|
| Part Description | Lower Seal, T‑Lip, 0.30 |
| Brand | Titan |
| Fits |
|
| Condition | New |
The Titan 0295311 Lower Seal, T‑Lip, 0.30 is a precision elastomeric seal with a unique T‑lip profile designed for the fluid section of the SprayTech Airless EP2105 sprayer. It fits around the piston rod and provides superior sealing action compared to standard lip seals, preventing paint from bypassing the piston and maintaining consistent pressure.
The T‑lip design creates an additional sealing edge that improves performance under high pressure and reduces wear. Over time, normal use, chemical exposure, and heat can cause the seal to harden, crack, or lose its lip geometry. A failed lower seal results in internal leakage, pressure drop, erratic spray, or paint weeping from the fluid section. Replacing with a genuine Titan 0295311 restores proper sealing, ensures full pumping pressure, and extends pump component life.
| Prevents fluid bypass | Seals piston rod to stop paint leakage under pressure |
|---|---|
| Maintains pressure | Ensures consistent output for uniform spray pattern |
| Reduces wear | T‑lip design provides better lubrication and longer life |
| Visible damage | Cracks, hardening, flattening, or torn T‑lip |
|---|---|
| Pressure loss | Sprayer runs but cannot reach or maintain operating pressure |
| External leakage | Paint weeping from the lower fluid section area |
| Rebuilding fluid section | Always replace seal when replacing packings or piston |
Titan part 0295311 is compatible with the following airless sprayer. Always confirm fitment using the correct parts diagram for your exact model.
| Brand / Model | Component |
|---|---|
| SprayTech Airless EP2105 | Lower seal, T‑lip, 0.30 |
When replacing the lower T‑lip seal, these components are typically inspected or replaced at the same time.
Replace the upper seal and piston packings together with the lower seal for a complete rebuild.
Spacers (0295308, 0295309) affect seal compression – inspect and replace if worn.
Inspect for scoring, nicks, or corrosion that could damage the new T‑lip seal.
Copyright © 2024 AlltitanParts.com - All Rights Reserved.
