Titan part 0294498 is a dump valve body designed for the pressure relief and priming system on compatible SprayTech Airless EP2300 SE, EP2300, EP2400, and EP2500 sprayers. This valve body houses the internal poppet and seal, allowing the operator to relieve system pressure or redirect flow for priming. Replacing a cracked, worn, or leaking dump valve body restores proper pressure control, prevents unexpected pressure release, and ensures safe, reliable sprayer operation.
| Part Number | 0294498 |
|---|---|
| Part Description | Body, Dump Valve |
| Brand | Titan |
| Fits | SprayTech Airless EP2300 SE, EP2300, EP2400, EP2500 |
| Condition | New |
The Titan 0294498 Dump Valve Body is an OEM replacement component for the pressure dump/prime valve assembly on SprayTech Airless EP2300 SE, EP2300, EP2400, and EP2500 sprayers. It is the main housing that contains the valve stem, seal, and spring, providing a leak‑tight passage for either spraying or pressure relief.
Over time, the dump valve body can crack from overtightening, freeze damage, or impact. A damaged body may cause constant weeping from the dump port, inability to build pressure, or failure to relieve pressure when needed. Replacing with genuine Titan 0294498 restores proper valve function, ensures operator safety, and allows smooth switching between prime and spray modes.
| Pressure relief | Allows safe release of trapped pressure |
|---|---|
| Priming | Redirects flow to purge air from system |
| Seal housing | Contains poppet and seat for leak‑tight shutoff |
| Visible cracks | Cracks in the body casting or threads |
|---|---|
| Constant leaking | Material drips from dump port in spray position |
| Pressure loss | Sprayer cannot build or hold pressure |
| Cross‑threaded / damaged threads | Valve stem or hose fitting will not seal |
Titan part 0294498 is compatible with the following sprayer models. Always confirm fitment using the correct parts diagram for your exact machine and serial number.
| Model | Component |
|---|---|
| SprayTech Airless EP2300 SE | Dump Valve Body |
| SprayTech Airless EP2300 | Dump Valve Body |
| SprayTech Airless EP2400 | Dump Valve Body |
| SprayTech Airless EP2500 | Dump Valve Body |
When replacing the dump valve body, consider inspecting or replacing these associated components.
Always replace the internal seal and poppet when installing a new valve body to ensure leak‑free operation.
Inspect the stem for wear or bending; replace if the valve does not turn smoothly.
Check the hose connected to the dump port for cracks or blockage.
Copyright © 2024 AlltitanParts.com - All Rights Reserved.
