Titan 0290373 Washer
OEM Titan Fiber Washer
Titan 0290373 Washer is a genuine OEM fiber washer used in the lift and tilt assembly of PowrLiner 4955, 6955, and 8955 line stripers, providing spacing and a bearing surface between adjoining pivot components.
Compatibility Table
OEM fiber washer restores correct spacing and bearing surface in the lift and tilt assembly, supporting smooth adjustment and reliable positioning.
Titan Lift / Tilt Assembly Component
Titan 0290373 Fiber Washer for PowrLiner 4955, 6955 & 8955
Titan 0290373 is a genuine OEM fiber washer used in the lift and tilt assembly of compatible PowrLiner line stripers. It provides spacing and a replaceable bearing surface between adjoining pivot components, supporting controlled movement during adjustment and operation.
| Detail | Technical / Commercial Information |
|---|---|
| Product Overview | Genuine OEM fiber washer for the lift and tilt assembly of PowrLiner 4955, 6955, and 8955 line stripers. |
| Function | Provides spacing and a sacrificial bearing surface between adjoining lift-and-tilt hardware. Reduces direct metal-to-metal contact, supports correct component alignment, and permits controlled movement around the pivot point. |
| Compatible Models | Titan PowrLiner 4955, PowrLiner 6955, and PowrLiner 8955 line stripers. |
| OEM Part Number | 0290373 Washer (also referenced as 290373). |
| Related Parts Commonly Serviced Together | Pivot fastener, retaining nut, wing knob, brackets, bushings, spacers, adjustment linkage, and mounting surfaces. Inspect these components when replacing the washer. |
| Common Problems Solved | Replaces a washer that has become compressed, cracked, split, distorted, contaminated, missing, or excessively worn. Replacement may correct unwanted side-to-side movement, uneven spacing, binding, looseness, or rough adjustment at the pivot. |
| Commercial Benefits | Allows contractors and repair shops to renew an individual wear component instead of replacing a complete lift assembly. Correct replacement supports smoother adjustment, reliable positioning, reduced hardware wear, and greater uptime on striping projects. |
The 0290373 Fiber Washer is a small but important component in the PowrLiner lift and tilt assembly. Fiber washers can compress, split, distort, or wear over time, particularly when surrounding pivot hardware becomes loose, contaminated, corroded, or incorrectly tightened. When servicing, note the original washer position and hardware order during disassembly. Clean the pivot surfaces, inspect the fastener and adjoining components, and avoid excessive tightening that could crush the fiber washer or restrict movement.
Frequently Asked Questions
No reviews yet. Be the first to review this product!
