Part number 0276511 is an Exhaust Hose Fitting used to connect the air exhaust hose to compatible HVLP turbine units. This fitting provides a secure attachment point for routing cooling air away from the turbine, helping to maintain proper airflow and prevent overheating during operation.
| Part Number | 0276511 |
|---|---|
| Part Description | Exhaust hose fitting |
| Fits | SprayTech CS9960; SprayTech CS9900; SprayTech CS9100; SprayTech CS8100 |
| Condition | New |
Part number 0276511 is an Exhaust Hose Fitting, a replacement component for the cooling air system on compatible SprayTech HVLP turbine units. This fitting is the connection point where the exhaust hose attaches to the front of the turbine housing. Its function is to securely couple the hose that directs hot exhaust air away from the unit and the work area.
SprayTech CS-series turbines utilize a dual air system: atomizing air for the spray gun and cooling air for the turbine motor. The cooling air is drawn in through intake vents and exhausted through the front of the unit . The exhaust hose fitting must maintain an airtight connection to ensure proper airflow. A cracked, broken, or missing fitting can cause the exhaust hose to detach, disrupting cooling flow and potentially leading to turbine overheating.
| Hose Connection | Provides a secure mounting point for the cooling air exhaust hose |
|---|---|
| Cooling Air Routing | Directs hot exhaust air away from the turbine to prevent overheating |
| System Integrity | Maintains proper backpressure and airflow through the cooling system |
| Physical Damage | Fitting is cracked, broken, or has sheared mounting tabs |
|---|---|
| Loose Hose Connection | Exhaust hose will not stay attached or seal properly on the fitting |
| Overheating Symptoms | Turbine runs hot and filter warning light activates due to restricted exhaust flow |
| Missing Component | Fitting is lost or was removed and not reinstalled during service |
Part number 0276511 is designed for use on the following SprayTech CS-series HVLP turbine models. Always confirm fitment using the correct parts diagram for your exact model and serial number.
| Compatible Models | Component |
|---|---|
| SprayTech CS9960 | Exhaust hose fitting |
| SprayTech CS9900 | |
| SprayTech CS9100 | |
| SprayTech CS8100 |
The exhaust hose fitting is part of the turbine cooling system. When servicing this component, these related parts are often inspected or replaced at the same time.
The flexible hose that attaches to the fitting may be cracked, kinked, or deteriorated and should be inspected.
A clogged cooling air filter restricts intake airflow, putting additional strain on the exhaust system. Regular cleaning is required.
The clamp securing the hose to the fitting may be corroded or broken and should be replaced to ensure an airtight connection.
Copyright © 2024 AlltitanParts.com - All Rights Reserved.
